We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
100 blue ring terminals with heat-shrink tubing, #10 stud, 16-14 AWG

HX1505 100pcs #10 16-14 AWG Blue Heat Shrink Ring Connectors

SKU CH-QY1B-WP3NK MPN HX1505

A 100-piece pack of blue heat-shrink ring terminals for 16-14 AWG wire with #10 stud size, tinned copper construction, adhesive-lined tubing and UL listing

  • ColorBlack
  • Standards/CertificationsUL Listed
  • 100 connectors suit AWG 16–14 and #10 studs
  • Tinned copper resists oxidation and lowers resistance
  • 3:1 adhesive heat-shrink seals at 80 °C
  • Brazed seam stops wire pull-out after crimp
  • UL Listed for code-compliant installations

Marine-Grade Ring Terminals

The HX1505 pack supplies 100 blue heat-shrink ring connectors built for 16-14 AWG wire and a #10 stud. Each terminal uses tinned red copper with a brazed seam and 3:1 adhesive-lined tubing that seals at 80 °C and withstands -55 °C to 125 °C operation.

Suited for sealed low-voltage wiring

Installers working on 12 V automotive, marine or industrial circuits gain a moisture-proof joint that resists vibration and corrosion. The kit is not intended for conductors outside the 16-14 AWG range, for stud sizes other than #10, or for high-voltage applications beyond the listed temperature envelope.

Capacity and headroom

One hundred pieces cover multiple vehicle or boat rewires with plenty of spares for future maintenance. The UL-listed terminals handle continuous duty up to 125 °C and shrink fully at 130 °C, but they do not accommodate larger gauge wire, different stud diameters or environments exceeding the stated thermal limits.

Highlights

  • 100 connectors suit AWG 16–14 and #10 studs
  • Tinned copper resists oxidation and lowers resistance
  • 3:1 adhesive heat-shrink seals at 80 °C
  • Brazed seam stops wire pull-out after crimp
  • UL Listed for code-compliant installations

Specifications

ColorBlack
Standards/CertificationsUL Listed

Questions about this item

What wire gauges must I already have for these #10 ring connectors to fit?

These terminals accept 16-14 AWG wire, so you need cables in that range for a proper crimp.

Will the 3:1 heat-shrink tubing seal over the older insulation on my existing 12 V boat wiring?

Yes, the adhesive-lined tubing shrinks at 80 °C and fully recovers at 130 °C, bonding to standard PVC insulation without melting it.

How can I confirm the crimp and seal are solid after heating?

A correct joint shows the brazed seam fully closed, the tubing smoothly conformed to the wire with no gaps, and adhesive visible at both ends.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.