We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nitrile fuel hose 14 ft long with stainless steel NPT fittings on both ends

Husky

Husky 3/4 in ID 14 ft Nitrile Fuel Hose

SKU CH-ZSJ0-3AY0R

A 14 ft nitrile fuel hose with 3/4 in inside diameter, 1 1/8 in outside diameter, stainless steel NPT fittings on both ends, rated to 50 psi at 70 F and -20 to 160 F operating temperature

  • Handles diesel and petrol with nitrile tube
  • 14 ft length reaches across engine bays
  • 50 psi working pressure at 70 °F
  • Stainless NPT ends resist corrosion and leaks
  • Operates from -20 °F to 160 °F

Husky 14 ft Nitrile Fuel Hose

This 14-foot fuel hose has a 3/4-inch inside diameter and a 1-1/8-inch outside diameter. Both ends carry 3/4-inch NPT stainless-steel fittings. The nitrile tube and nitrile/PVC cover handle fuel transfer in automotive and workshop settings. It is rated for a maximum working pressure of 50 psi at 70 degrees Fahrenheit.

Replaces worn rubber or cracked PVC lines

Swap out deteriorated fuel lines that leak, harden or collapse under vacuum. The nitrile construction resists oil-based fuels better than standard rubber, while the stainless fittings resist corrosion at the connection points. Upgrade when the original hose shows surface checking, soft spots or fuel seepage at the clamps.

Suits mechanics and DIYers servicing petrol

The hose operates from -20 to 160 degrees Fahrenheit and carries UL and ISO compliance marks. It is not compatible with diesel exhaust fluid. Buyers needing DEF-rated hose, higher pressure ratings or different fitting styles should select an alternative product.

Highlights

  • Handles diesel and petrol with nitrile tube
  • 14 ft length reaches across engine bays
  • 50 psi working pressure at 70 °F
  • Stainless NPT ends resist corrosion and leaks
  • Operates from -20 °F to 160 °F

Specifications

BrandHUSKY

Questions about this item

What clearance do I need for the 1-1/8 in outside diameter?

Allow at least 1-1/8 in of free space around the hose; the cover is nitrile/PVC and the fittings are 3/4 in NPT stainless steel on both ends.

How do I install the 3/4 in NPT fittings without leaks?

Clean the threads, apply fuel-rated thread sealant, hand-tighten then turn 1-2 full turns with a wrench — over-tightening cracks the fitting.

When should I replace the hose given the -20 to 160 °F range and 50 psi rating?

Inspect yearly; replace if cover cracks, stiffens, or shows soft spots, or after any exposure beyond 160 °F or 50 psi at 70 °F.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.