We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Straight silver aluminium liquid-tight cord connector, 1.00-1.13 in range, 1 11/16 in long

Hubbell Incorporated

Hubbell Wiring Device-Kellems Lqd Tight Conn 1.00-1.13 in Straight 1 Cord HAWA SHC1047

SKU CH-JKNR-8J51F

A liquid-tight cord connector accepting 1.00 to 1.13 inch cables with a straight 1-inch MNPT aluminium body

  • TypeWire Connectors
  • Liquid-tight seal for cords 1.00 to 1.13 in
  • Straight aluminium body fits 1 in MNPT box entry
  • Single-cord design with no external strain relief
  • 1 11/16 in installed length from box face
  • Silver finish identifies HAWA SHC1047 series

Liquid Tight Cord Connector

This liquid tight cord connector accepts a single cable with an outside diameter between 1.00 and 1.13 inches. It mounts into a 1 inch MNPT threaded opening and uses an aluminium body with a silver finish. The straight style measures 1 11/16 inches from the box face to the end of the connector. No external strain relief is fitted and the body is not insulated.

Upgrade from open knockouts

The connector replaces an open knockout or a basic bushing when a sealed, code-compliant entry is required for one cable in the 1.00 to 1.13 inch range. The step up is worth it where moisture, oil or dust would otherwise enter the enclosure. It does not suit cables thinner than 1.00 inches or thicker than 1.13 inches, nor does it provide a strain relief function beyond the gland seal.

1 inch MNPT mounting constraint

The 1 inch MNPT thread fixes the connector to enclosures cut for that trade size; a different thread or a larger cable demands a different fitting. The aluminium construction resists corrosion in typical industrial atmospheres but is not rated for direct burial or continuous immersion. The lack of external strain relief means the cable must be supported independently where vibration or tension is present.

Highlights

  • Liquid-tight seal for cords 1.00 to 1.13 in
  • Straight aluminium body fits 1 in MNPT box entry
  • Single-cord design with no external strain relief
  • 1 11/16 in installed length from box face
  • Silver finish identifies HAWA SHC1047 series

Specifications

BrandHubbell Wiring Device-Kellems
TypeWire Connectors

Questions about this item

Will the 1 in MNPT box connection fit my existing enclosure?

The connector uses a 1 in MNPT thread for the box connection; verify your enclosure has a matching 1 in female NPT opening before installation.

How do I secure the cord inside the 1.00–1.13 in range without an external strain relief?

Insert the cord through the gland, then tighten the compression nut until the internal sealing ring grips the jacket firmly; the step often missed is fully seating the cord before final torque.

Does the aluminum body require any corrosion protection or periodic re-tightening?

The silver-finished aluminum body is corrosion resistant in normal environments; inspect the compression nut annually and re-torque if vibration has loosened it.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.