We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White wall-mounted occupancy vacancy sensor with single button

Hubbell Incorporated

Hubbell Incorporated WS2000W Wall Mount Sensor Occupancy Vacancy

SKU CH-9J3C-6XT6E

A wall-mount sensor switches lights on or off based on occupancy or vacancy, covers up to 1,200 sq ft, and works with 120 to 277V AC fluorescent or LED loads up to 1,000W at 120V

  • Detects motion across 1,200 sq ft using passive infrared technology
  • Switches lights on automatically when occupancy is sensed
  • Turns lights off after vacancy to reduce energy waste
  • Operates on 120 to 277V AC without a neutral wire
  • Controls up to 1,000W fluorescent or LED loads at 120V AC

Wall Mount Occupancy Sensor

The Hubbell WS2000W is a hard-wired passive infrared sensor that mounts on a wall to automate lighting in commercial spaces. It detects motion across up to 1,200 sq ft and switches connected loads without requiring a neutral conductor.

Wiring and Load Compatibility

The unit operates on 120 to 277V AC circuits and handles fluorescent or LED loads rated at 1,000W at 120V AC. A single button provides local override while the sensor manages automatic on and off switching for occupancy or vacancy modes.

Thermal and Power Behaviour

Power draw is limited to the sensing electronics with no dimming circuitry or night-light function to add heat. Hard-wired communication eliminates wireless modules, keeping steady-state dissipation low and operation silent in normal use.

Highlights

  • Detects motion across 1,200 sq ft using passive infrared technology
  • Switches lights on automatically when occupancy is sensed
  • Turns lights off after vacancy to reduce energy waste
  • Operates on 120 to 277V AC without a neutral wire
  • Controls up to 1,000W fluorescent or LED loads at 120V AC

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS

Questions about this item

What is the maximum coverage area of the WS2000W sensor?

The sensor provides a maximum coverage area of 1,200 sq ft using passive infrared technology.

How much power does the WS2000W draw when controlling a full 1,000 W load at 120 V?

The unit is hard-wired and rated for 1,000 W incandescent at 120 V AC; its own standby consumption is minimal.

Does the WS2000W require a neutral wire in the switch box?

No neutral is required; the sensor operates on 120 to 277 V AC without a neutral connection.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.