Hubbell Incorporated
Hubbell Incorporated WS1001W Vacancy Sensor PIR 1200 sq ft White
A passive infrared vacancy sensor controls up to 1,200 square feet of fluorescent or LED lighting at 120 volts with a 600-watt incandescent load rating and no neutral wire required
- Automatically turns lights off when room is vacant using passive infrared detection
- Covers up to 1200 square feet with a single sensor unit
- Operates on standard 120V AC wiring without requiring a neutral connection
- Handles fluorescent and LED loads up to 600 watts at 120 volts
- Simple one-button vacancy operation with hard-wired installation
Vacancy sensor for 1 200 sq ft
The Hubbell WS1001W is a passive-infrared vacancy sensor that controls lighting across up to 1 200 square feet. It is intended for commercial or residential spaces where automatic shut-off is required after occupants leave. The unit operates at 120 V AC and carries a 600 W incandescent load rating. It supports fluorescent and LED lighting technologies.
Hard-wired single-button control
The sensor installs in a standard wall-box and connects with hard-wired communication, so no neutral conductor is needed. A single button provides manual on/off operation while the PIR detector handles automatic shut-off. The design leaves the dimming circuit free for separate control gear if dimming is added later. No nightlight or dimming switch is included.
Low standby draw and silent operation
Passive-infrared sensing draws minimal power while monitoring the coverage zone. The device produces no audible noise because it has no moving parts or cooling fan. Normal use sees only the small standby current required to keep the detector active, keeping energy consumption negligible when the lights are off.
Highlights
- Automatically turns lights off when room is vacant using passive infrared detection
- Covers up to 1200 square feet with a single sensor unit
- Operates on standard 120V AC wiring without requiring a neutral connection
- Handles fluorescent and LED loads up to 600 watts at 120 volts
- Simple one-button vacancy operation with hard-wired installation
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|
Questions about this item
What is the maximum coverage area of the WS1001W PIR sensor?
The sensor covers up to 1,200 sq ft using passive infrared technology.
How much heat or power does the sensor draw when operating continuously?
It operates at 120V AC with a 600W incandescent load rating and no neutral wire required.
What existing wiring must be in place for the WS1001W to function?
A hard-wired 120V AC circuit for fluorescent or LED lighting is required; no neutral connection is needed.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
