We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory wall-mount occupancy sensor with nightlight, hard-wired, PIR detection

Hubbell Incorporated

Hubbell Incorporated WS1000NI Wall Mount Occupancy Vacancy Sensor

SKU CH-3PG6-PRQVT

Wall-mount occupancy and vacancy sensor covering up to 1,200 sq ft with passive infrared detection and a built-in nightlight

  • Covers up to 1,200 sq ft with passive infrared detection
  • Works with fluorescent and LED loads up to 600 W at 120 V AC
  • No neutral wire required for simpler installation
  • Built-in nightlight adds low-level illumination
  • Single-button control handles both occupancy and vacancy modes

Wall Mount Occupancy Vacancy Sensor

The Hubbell WS1000NI is a hard-wired wall mount sensor that detects occupancy or vacancy using passive infrared technology. It operates at 120V AC and covers up to 1,200 sq ft of space. A built-in nightlight adds low-level illumination without a separate fixture.

Suitable for fluorescent

Installers needing a single-button control for standard loads up to 600W will find this unit straightforward. Projects that require dimming functions, a neutral wire connection, or coverage beyond the stated area should consider alternative devices.

120V AC operating voltage

The sensor is rated for 120V AC circuits only and carries a 600W incandescent load rating at that voltage. Confirm the supply voltage matches before installation to ensure correct operation.

Highlights

  • Covers up to 1,200 sq ft with passive infrared detection
  • Works with fluorescent and LED loads up to 600 W at 120 V AC
  • No neutral wire required for simpler installation
  • Built-in nightlight adds low-level illumination
  • Single-button control handles both occupancy and vacancy modes

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS

Questions about this item

How many square feet does the PIR sensor cover at its maximum?

The sensor covers up to 1,200 square feet when mounted on the wall.

Does the unit generate noticeable heat or noise during continuous operation?

It is a passive infrared device with no fan or moving parts, so it runs silently and produces no perceptible heat.

What voltage supply must already be present at the mounting location?

A 120 V AC circuit is required; the sensor connects directly to the line and neutral wires.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.