We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory wall-mount occupancy vacancy sensor with single button

Hubbell Incorporated

Hubbell Incorporated WS1000I Wall Mount Occupancy Vacancy Sensor

SKU CH-2HA0-KMV34

Wall-mount occupancy and vacancy sensor covers 1,200 sq ft using passive infrared at 120V AC

  • Covers up to 1,200 sq ft with passive infrared sensing
  • Controls both occupancy and vacancy modes for flexible lighting automation
  • Supports 120 V AC circuits and 600 W incandescent loads
  • Works with fluorescent and LED fixtures without a neutral wire
  • Hard-wired communication ensures reliable operation without wireless interference

What this sensor does

The Hubbell WS1000I is a wall-mount occupancy and vacancy sensor for indoor lighting control. It uses passive infrared detection to cover up to 1,200 sq ft at 120V AC. The unit switches fluorescent or LED loads up to 600W without requiring a neutral wire.

Installation notes

The device is hard-wired into the lighting circuit and fits a standard wall-box opening. Because no neutral conductor is needed, retrofits in older two-wire switch loops are straightforward. A single button provides local override. The 600W incandescent rating at 120V must not be exceeded, so verify the connected load before energising.

Check before ordering

Confirm the supply voltage is 120V AC and that the total lighting load stays within the 600W limit. The sensor does not support dimming, so it cannot replace a dimmer switch. Ensure the mounting location gives the passive infrared detector a clear view of the desired coverage area up to 1,200 sq ft.

Highlights

  • Covers up to 1,200 sq ft with passive infrared sensing
  • Controls both occupancy and vacancy modes for flexible lighting automation
  • Supports 120 V AC circuits and 600 W incandescent loads
  • Works with fluorescent and LED fixtures without a neutral wire
  • Hard-wired communication ensures reliable operation without wireless interference

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS

Questions about this item

How can I confirm the WS1000I is detecting motion correctly after installation?

Walk through the 1,200 sq ft coverage zone; the connected fluorescent or LED load up to 600 W at 120 V AC should switch on automatically, showing the PIR sensor is active.

What comes with the WS1000I and what must I supply separately?

The sensor includes the wall-mount unit with one button; you must provide 120 V AC hard-wired circuit wiring and the lighting load, as no dimming switch or neutral connection is included.

Which WS1000I version suits a 120 V fluorescent or LED circuit without a neutral wire?

This single ivory model operates at 120 V AC, handles 600 W incandescent or equivalent fluorescent and LED loads, requires no neutral, and covers 1,200 sq ft.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.