Hubbell Incorporated
Hubbell Incorporated VHC1037 3/4 in 45° Yellow Cord Connector
A 45-degree yellow cord connector accepts 0.63 to 0.75 inch cables into a 3/4 inch MNPT box fitting
- TypeCable Management & Conduit
- ColorYellow
- Fits 0.63 to 0.75 in cables for secure connections
- 45 degree angle eases routing in tight spaces
- Yellow gland colour allows quick visual identification
- Aluminium body resists corrosion in damp environments
- Liquid tight seal protects wiring from moisture ingress
Liquid-tight cord connector for 45° routing
The Hubbell VHC1037 provides a liquid-tight seal for a single cable entering an enclosure at a 45-degree angle. It accepts cord diameters from .63 in to .75 in and threads into a 3/4 in MNPT box connection. The aluminium body with yellow gland colour code suits industrial and commercial wiring runs where moisture protection is required.
Thermals noise and power draw
As a passive wiring accessory the connector generates no heat, emits no noise and draws no power. Its aluminium construction dissipates ambient temperature naturally without affecting cable performance. The 45-degree style simply redirects the cable path while maintaining the liquid-tight seal in normal operation.
What the bundled accessories change
The product ships as a single connector unit with no external strain-relief component, insulated throat or additional glands. Installers must supply their own locknuts, sealing tape or bushings to complete the termination. The absence of extra parts keeps the assembly compact at 2 5/16 in from box face to connector end.
Highlights
- Fits 0.63 to 0.75 in cables for secure connections
- 45 degree angle eases routing in tight spaces
- Yellow gland colour allows quick visual identification
- Aluminium body resists corrosion in damp environments
- Liquid tight seal protects wiring from moisture ingress
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|---|
| Type | Cable Management & Conduit |
| Color | Yellow |
Questions about this item
How do I install the 45° Yellow Cord Connector onto a 3/4 in MNPT box, and what step is often missed?
Thread the aluminum body onto the 3/4 in MNPT box connection, insert the cord through the gland so its diameter falls between .63 in and .75 in, then tighten the compression nut to seal; the step often missed is confirming the cord diameter is within the .63 to .75 in range before final tightening.
What maintenance or replacement will the VHC1037 connector need over time?
Inspect the yellow gland and silver aluminum body periodically for cracks, UV degradation, or corrosion; replace the entire connector if the gland hardens, the threads strip, or the liquid-tight seal no longer holds.
What limit appears first when the cord connector is used continuously in a wet or oily environment?
The liquid-tight seal at the gland is the first limit; if the cord diameter drifts outside the .63 to .75 in range or the gland material degrades, moisture and oil can penetrate the 3/4 in MNPT connection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



