Hubbell Incorporated
Hubbell Incorporated UGR1-20231QW straight blade plug
A 20 A, 120 V AC hazardous-location receptacle with three wires, two poles and copper-free aluminium construction
- 20 A rating powers heavy-duty equipment
- 120 V AC suits standard North American supply
- Copper-free aluminium body resists corrosion
- NEMA 3, 7, 9 rating for hazardous locations
- Powder-coated finish adds environmental protection
Hazardous-location 120 V receptacle
The Hubbell Killark UGR1-20231QW is a straight-blade receptacle rated for Class I, Division 1 and 2 hazardous areas. It accepts a 5-20R plug at 120 V AC and 60 Hz, making it suitable for industrial plants where flammable gases or dust may be present. The copper-free aluminium body and powder-coated finish resist corrosion in harsh environments.
NEMA 5-20R configuration
This unit provides a 2-pole, 3-wire grounding arrangement rated at 20 A. The dead-end 1/2-inch hub allows conduit entry from one side only, so installers must plan the raceway accordingly. Stainless-steel mounting screws secure the device in a standard 1-gang box.
20 A continuous capacity
The receptacle carries up to 20 A on 120 V circuits without derating in the listed hazardous locations. It is not intended for higher-voltage distribution or for non-hazardous general-purpose wiring where a standard commercial device would suffice. Builders needing multi-gang assemblies or feed-through hubs should select a different series.
Highlights
- 20 A rating powers heavy-duty equipment
- 120 V AC suits standard North American supply
- Copper-free aluminium body resists corrosion
- NEMA 3, 7, 9 rating for hazardous locations
- Powder-coated finish adds environmental protection
Specifications
| Brand | HUBBELL KILLARK |
|---|
Questions about this item
What does the 20 A rating mean when this receptacle is installed?
The receptacle is rated for 20 A at 120 V AC, 60 Hz, so it can supply circuits drawing up to 20 A continuously.
What does the NEMA 5-20R designation tell me about the interface?
NEMA 5-20R identifies a 2-pole, 3-wire grounding receptacle for 120 V AC service.
What mounting box and hub size does this unit need?
It mounts in a standard 1-gang box and uses a 1/2 in dead-end hub for conduit entry.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Ideal 2011s Splice Connector For 2014 Bare Copper Pack 50
- Bare Copper
Bryant Locking Straight Blade Plug L6-20P 20A 250V 2.0HP Black/White 70620
- HAWA



