We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory nylon GFCI decorator duplex receptacle, flush mount, 20A 125V

Hubbell Incorporated

Hubbell Incorporated SNAPGF83I GFCI Receptacle 20A 125V Ivory Nylon

SKU CH-KNBA-NG9DX

A 20 A, 125 V AC ground-fault circuit interrupter receptacle with ivory nylon housing and flush-mount decorator duplex design

  • TypeWiring Devices
  • GFCI protection cuts shock risk at 20 A circuits
  • 125 V AC rating suits standard North American outlets
  • Ivory nylon housing resists impact and discolouration
  • Decorator duplex style fits single-gang flush boxes
  • Meets NEC standards for code-compliant installations

Application and audience

This GFCI receptacle provides ground-fault protection for 20 A branch circuits at 125 V AC. It is intended for electricians and facility managers who need a decorator-style duplex outlet that meets NEC requirements in residential or light-commercial wiring projects.

Behaviour under sustained load

The device carries a continuous current rating of 20 amperes and uses a straight-through connection orientation for reliable termination. Its nylon housing resists impact and chemical exposure while maintaining a NEMA 1 enclosure rating for indoor use. The internal GFCI mechanism monitors imbalance continuously rather than only during brief transients.

Pre-installation checks

Verify that the supply circuit is single-phase 125 V AC and protected by a 20 A breaker. Confirm the box accommodates a single-gang flush-mount decorator device with three-wire connections. Ensure local code accepts NEMA 5-20R configuration and that no cover plate is required for the intended location.

Highlights

  • GFCI protection cuts shock risk at 20 A circuits
  • 125 V AC rating suits standard North American outlets
  • Ivory nylon housing resists impact and discolouration
  • Decorator duplex style fits single-gang flush boxes
  • Meets NEC standards for code-compliant installations

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeWiring Devices

Questions about this item

Does the SNAPGF83I generate audible noise or heat during continuous 20 A operation on a 125 V AC circuit?

The SNAPGF83I is a passive GFCI receptacle with no moving parts or active cooling, so it produces no audible noise. Heat rise is limited to normal resistive warming at the contacts when loaded to its 20 A rating.

What wiring and circuit protection must already be in place for the SNAPGF83I to function correctly?

The SNAPGF83I requires a 125 V AC single-phase supply with a 20 A branch-circuit breaker, three-conductor cable (line, neutral, ground) and a standard flush-mount box. No cover is included, so a decorator wall plate must be supplied separately.

Will the SNAPGF83I coordinate with existing 125 V AC branch circuits that use standard duplex receptacles downstream?

Yes. The SNAPGF83I provides GFCI protection for itself and any standard receptacles wired to its load terminals, allowing mixed GFCI and non-GFCI outlets on the same 125 V AC circuit.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.