We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White nylon flush-mount duplex outlet with tamper-resistant shutters and SNAPConnect terminal

Hubbell Incorporated

Hubbell Incorporated SNAP5362WTRA 20 A 125V AC Tamper-Resistant Duplex Receptacle

SKU CH-7NEQ-M42Y3

A 20 A 125V AC tamper-resistant duplex receptacle with SNAPConnect modular wiring for fast, consistent commercial installations

  • TypeWiring Devices
  • Tamper-resistant design prevents accidental contact in commercial spaces
  • SNAPConnect modular wiring snaps terminal into place for fast installation
  • Rated 20 A at 125 V AC for standard NEMA 5-20R circuits
  • Nylon housing with brass contacts withstands -40 °F to 167 °F operating range
  • Certified to UL 498, CSA C22.2 No. 42 and Federal Spec W-C-596

Commercial-grade 20 A duplex receptacle

The Hubbell SNAPConnect 5-20R is a 20 amp, 125V AC flush-mount duplex outlet built for commercial indoor dry locations. Its modular back-wired connector snaps into place during final assembly, giving installers a repeatable termination without wrapping wires around screws. The nylon housing and brass contacts meet specification-grade durability requirements. Certified to UL 498, CSA C22.2 No. 42, Federal Specification W-C-596 and NEMA WD-6.

Thermal and electrical performance

The device is rated for continuous operation up to 75 °C (167 °F) and survives a minimum 2,000 V dielectric voltage test. Tamper-resistant shutters block foreign objects from contacting live parts under normal use. The SNAPConnect terminal maintains consistent contact pressure across the operating temperature range of -40 °F to 167 °F. No moving parts or active cooling are involved, so the receptacle runs silently and adds no measurable power draw beyond the connected load.

Replaces standard screw-terminal outlets

Electricians upgrading older 5-20R receptacles gain faster rough-in and trim-out because the modular connector eliminates individual wire looping. The tamper-resistant design satisfies modern code requirements where legacy devices fall short. The jump is worthwhile on projects with many devices or where maintenance crews value tool-less terminal replacement. Installations needing weather-resistant or GFCI protection require different devices not covered by this model.

Highlights

  • Tamper-resistant design prevents accidental contact in commercial spaces
  • SNAPConnect modular wiring snaps terminal into place for fast installation
  • Rated 20 A at 125 V AC for standard NEMA 5-20R circuits
  • Nylon housing with brass contacts withstands -40 °F to 167 °F operating range
  • Certified to UL 498, CSA C22.2 No. 42 and Federal Spec W-C-596

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeWiring Devices

Questions about this item

How do I install the SNAPConnect terminal and what step causes the most failed connections?

Snap the terminal firmly until it clicks; the most common error is not pushing it fully home, leaving the contact floating.

Which component will need replacement first under normal commercial use?

The brass contacts inside the nylon housing wear before the housing itself, so the receptacle body is the service item.

What limit appears first when the outlet runs at 20 A continuously in a warm enclosure?

The 75 °C maximum continuous temperature rating is reached before the 2,000 V dielectric strength becomes a concern.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.