We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black straight blade receptacle with tamper-resistant shutters, SNAPConnect modular terminal, 15 amp rating

Hubbell Incorporated

Hubbell Incorporated SNAP5262BKTRA Straight Blade Receptacle 5-15R

SKU CH-RKYK-3G6KD

A tamper-resistant 15 A straight-blade receptacle with a modular SNAPConnect terminal that cuts installation time and snaps in for a secure connection

  • TypeWiring Devices
  • Tamper-Resistant design protects against accidental contact
  • SNAPConnect modular connector cuts installation time
  • Audible snap confirms a solid connection every time
  • Assembled in the USA for reliable quality
  • Straight blade 5-15R configuration fits standard circuits

Hubbell SNAPConnect 5-15R Receptacle

The Hubbell SNAP5262BKTRA is a straight-blade receptacle rated for 15 amps. It uses the SNAPConnect modular system to replace traditional pigtail wiring during rough-in. This design targets electricians and maintenance teams who need fast, consistent device installation in commercial or residential projects. The tamper-resistant shutter adds a safety layer for general-purpose branch circuits.

Sustained connection reliability

The audible snap confirms a solid mechanical and electrical mate each time the terminal is seated. Because the connector is installed during rough-in, the final device snaps into a pre-verified interface, reducing loose connections that develop under thermal cycling. The tamper-resistant mechanism remains effective after repeated insertion cycles, maintaining code compliance without degradation. Assembled in the USA, the device is built for long-term service in standard 15-amp circuits.

Snap-in installation and common issues

Installation consists of mounting the modular connector during rough-in, then snapping the receptacle into place once walls are finished. No wire stripping or screw termination is needed at the device, cutting labour time significantly. The most common issue occurs if the protective cover is removed prematurely, exposing the connector to debris or damage before the final snap. Maintenance change-outs are tool-free, but the connector itself must stay seated in the box to avoid rework.

Highlights

  • Tamper-Resistant design protects against accidental contact
  • SNAPConnect modular connector cuts installation time
  • Audible snap confirms a solid connection every time
  • Assembled in the USA for reliable quality
  • Straight blade 5-15R configuration fits standard circuits

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeWiring Devices

Questions about this item

Does the SNAP5262BKTRA receptacle generate any noise or heat during continuous use?

The SNAP5262BKTRA is a passive wiring device with no moving parts or active electronics, so it produces no audible noise and negligible heat during normal 15 A operation.

What existing wiring components are required to install this SNAPConnect receptacle?

Installation requires a SNAPConnect modular connector that was fitted during rough-in; the receptacle then snaps onto that connector without pigtails.

Will this 5-15R device work with older branch-circuit wiring already in the wall?

Yes, the SNAPConnect modular connector accepts standard solid or stranded copper conductors, so it connects to existing 15 A branch circuits without rewiring.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.