We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow zinc-plated steel liquid-tight cord connector, straight style, 1 in MNPT

Hubbell Incorporated

Hubbell Incorporated SHC1098ZP Liquid Tight Connector 1 in Yellow

SKU CH-BKFS-FS20Y

Straight zinc-plated steel liquid-tight cord connector accepts 0.63 to 0.75 inch cords with 1 inch MNPT box connection and yellow gland

  • TypeStrain Relief
  • ColorYellow
  • Yellow gland colour for quick visual identification
  • Zinc-plated steel body resists corrosion in harsh environments
  • Accepts cord diameters from .63 to .75 in for flexible installations
  • Straight 1 in MNPT hub connects directly to standard enclosures
  • CSA LR27378 and UL E54218 listings confirm safety compliance

Liquid-Tight Cord Connector

The Hubbell Incorporated SHC1098ZP is a straight, zinc-plated steel connector that accepts one cord with a diameter between .63 and .75 inches. It threads onto a 1 inch MNPT box entry and provides a watertight seal for indoor or outdoor electrical installations. The yellow gland colour code aids quick identification on site. It carries CSA LR27378 and UL E54218 listings.

Replaces Open Bushings

This connector upgrades basic knock-out plugs or non-rated bushings by adding strain relief and a certified liquid-tight seal. The jump is worth it when a cord passes through a wet or dusty location and code requires a listed fitting. It eliminates the risk of insulation damage at the box entry without adding external strain-relief hardware.

Fits Standard Hubs

The 1 3/8 inch body length sits flush against the enclosure, leaving maximum interior wiring space. No insulated throat is included, so pair it with a compatible locknut and grounding bushing when the circuit requires bonding. The single-cord design frees the installer from sizing multi-hole glands but cannot accommodate a second cable run.

Highlights

  • Yellow gland colour for quick visual identification
  • Zinc-plated steel body resists corrosion in harsh environments
  • Accepts cord diameters from .63 to .75 in for flexible installations
  • Straight 1 in MNPT hub connects directly to standard enclosures
  • CSA LR27378 and UL E54218 listings confirm safety compliance

Specifications

BrandHubbell Wiring Device-Kellems
ModelSHC1098ZP
TypeStrain Relief
ColorYellow

Questions about this item

What cord diameter range fits the 1 in MNPT box connection on the SHC1098ZP connector?

The connector accepts cords from .63 in to .75 in diameter and threads into a 1 in MNPT box opening.

How is the zinc-plated steel SHC1098ZP installed, and what step is often missed?

Thread the straight body into the 1 in MNPT opening, insert the cord through the gland, then tighten the compression nut to seal the .63-.75 in cord range; skipping the final torque leaves the liquid-tight seal incomplete.

When should the yellow gland on this liquid-tight connector be replaced?

Replace the gland if the yellow colour fades from UV exposure, the sealing lips crack, or the cord slips inside the .63-.75 in range, since the connector has no external strain relief to redistribute stress.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.