We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray nylon straight cable connector 1/2 in NPT

Hubbell Incorporated

Hubbell Incorporated SEC50GA Cable Connector 1/2 in Straight Gray

SKU CH-DHB5-B53V5

Connects 0.17 in to 0.45 in cords to a 1/2 in NPT box with a straight, insulated nylon body meeting UL 514B and CSA 22.2 No. 18 standards

  • TypeNPT
  • ColorGray
  • Liquid-tight seal protects cords from moisture ingress
  • Accepts cord diameters from 0.17 in to 0.45 in for versatile fit
  • Nylon construction resists corrosion and impact damage
  • Straight 1/2 in MNPT style enables direct box connection
  • Meets CSA C22.2 No. 18 and UL 514B safety standards

1/2 in NPT Liquid-Tight Cord Connector

This straight gray nylon connector fits a 1/2 in MNPT box opening and accepts a single cord with a diameter between .17 in and .45 in. It is rated to CSA C 22.2 No. 18, UL 514B and VDE standards for liquid-tight installations. The insulated body measures 1 11/16 in from the box face to the end of the connector. No external strain relief is included.

Replaces open knockouts or non-rated bushings

Use this connector when a code-compliant liquid-tight seal is required for a single flexible cord entering a metallic or non-metallic enclosure. The jump is worth it when the existing fitting does not meet UL 514B or when the cord diameter falls outside the range of a previously installed gland. It does not suit applications that need an integrated external strain-relief clamp.

Verify box threading and cord diameter

Confirm the enclosure provides a 1/2 in MNPT threaded hub before ordering. Measure the cord outer diameter to ensure it sits within the .17 in to .45 in clamping range. The connector is a straight style, so allow 1 11/16 in of clearance inside the box for the body length. No external strain-relief hardware is supplied or accommodated.

Highlights

  • Liquid-tight seal protects cords from moisture ingress
  • Accepts cord diameters from 0.17 in to 0.45 in for versatile fit
  • Nylon construction resists corrosion and impact damage
  • Straight 1/2 in MNPT style enables direct box connection
  • Meets CSA C22.2 No. 18 and UL 514B safety standards

Specifications

BrandHubbell Wiring Device-Kellems
ModelSEC50GA
TypeNPT
ColorGray

Questions about this item

Will the 1/2 in MNPT box connection fit my existing knockout?

The connector uses a 1/2 in MNPT thread that matches standard 1/2 in knockouts in junction boxes and enclosures.

How do I tighten the gland without damaging the cord in the .17 to .45 in range?

Insert the cord through the nylon body, then hand-tighten the compression nut until the gland seals evenly — over-torquing with tools can crush the insulation.

When should I replace the nylon connector if it stays outdoors?

Inspect annually; replace if the gray body shows cracking, chalking, or if the seal no longer passes a CSA C 22.2 No. 18 liquid-tight test.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.