Hubbell Incorporated
Hubbell Incorporated RSD115PLW 15 A 120/277 V AC white rocker switch
A white single-pole rocker switch rated 15 A at 120/277 V AC with pilot light, screw terminals and 1.2 in height
- 15 A 120/277 V AC rating handles standard residential circuits
- Pilot light integrated for instant status visibility
- Single-pole rocker provides smooth, quiet operation
- Ultrasonically welded cover and base adds durability
- CSA certified and UL listed for code compliance
White rocker switch for 15 A circuits
This single-pole switch is rated 15 A at 120/277 V AC and includes a 1/2 hp motor rating. A built-in pilot light shows the circuit status. The smooth, quiet rocker action suits residential lighting and small motor loads. The grounded, white finish matches standard décor.
Back or side wiring with screw terminals
Wires can be landed on back or side screw terminals for flexible rough-in. The ultrasonically welded cover and base create a rigid assembly that resists loosening over time. A common error is leaving the pilot-light lead disconnected, which leaves the indicator dark. Verify the switch is mounted in a grounded box before energising.
120/277 V AC rating defines the application limit
The 15 A, 120/277 V AC rating restricts use to single-phase lighting and fractional-horsepower circuits within that voltage range. It is not suitable for higher-current or three-phase loads. The 1.2 in overall height fits standard wall boxes, but deeper devices may crowd the enclosure. Always confirm the circuit voltage matches the switch rating before installation.
Highlights
- 15 A 120/277 V AC rating handles standard residential circuits
- Pilot light integrated for instant status visibility
- Single-pole rocker provides smooth, quiet operation
- Ultrasonically welded cover and base adds durability
- CSA certified and UL listed for code compliance
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|
Questions about this item
How can I confirm the 15 A 120/277 V AC rocker switch is working after installation?
Operate the rocker; the pilot light should illuminate when the circuit is energised and the load should respond smoothly and quietly.
What comes in the box with the RSD115PLW and what must I supply?
The switch itself is included; you will need to provide mounting screws, a compatible wall box and wire connectors for the screw terminals.
Which version of this switch should I choose for a standard 120 V residential lighting circuit?
The single-pole 15 A model with 120/277 V AC rating and 1/2 hp capacity matches typical residential lighting loads.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
