We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanized zinc rectangular masonry electrical box with concentric knockouts

Hubbell Incorporated

Hubbell Incorporated RACO 695 Electrical Box 22.5 cu in 1 Gang Galvanized Zinc

SKU CH-TVZA-NV1PX

A 22.5 cu in galvanised zinc masonry box with ten concentric knockouts and welded construction for single-gang installations

  • TypeElectrical Boxes & Covers
  • 5 cu in capacity gives extra wiring room
  • Rugged welded construction stays intact during installation
  • Ten concentric knockouts accept 1/2 in and 3/4 in conduit
  • Device ears block mortar from entering device holes
  • Galvanized zinc finish resists corrosion in masonry walls

1-Gang Masonry Electrical Box

The RACO 695 is a 22.5 cu in single-gang masonry box built for block or brick installations. Its rectangular profile matches square cuts in masonry and the nongangable design suits standalone device mounting. Rugged welded construction prevents the box from falling apart during rough-in work. Device ears are positioned inside the box to keep mortar out of the device holes.

Standard Concentric Knockouts

Ten concentric knockouts accept both 1/2 in. and 3/4 in. conduit sizes for flexible raceway entry. The 3-1/2 in. depth provides generous wiring volume for easier splices and device installation. Standard wall plates fit directly without special adapters. A steel voltage partition numbered 971 is compatible when circuit separation is required.

Galvanized Zinc Durability

Galvanized zinc coating protects the steel body against corrosion in damp masonry environments. The welded seams maintain structural integrity when the box is embedded in mortar or concrete. One-gang format limits the box to a single device such as a switch or receptacle. Builders needing multi-gang configurations must select a different box model.

Highlights

  • 5 cu in capacity gives extra wiring room
  • Rugged welded construction stays intact during installation
  • Ten concentric knockouts accept 1/2 in and 3/4 in conduit
  • Device ears block mortar from entering device holes
  • Galvanized zinc finish resists corrosion in masonry walls

Specifications

BrandRACO
TypeElectrical Boxes & Covers

Questions about this item

How is the RACO 695 masonry box mounted in a block wall, and what step prevents mortar from blocking the device holes?

The rectangular box fits a square cut in the block; the built-in device ears sit inside the box to keep mortar out of the device-mounting holes during installation.

What maintenance or replacement might the RACO 695 need after the wall is finished?

The galvanized zinc coating resists corrosion, so the box itself rarely needs replacement; only the cover plate or internal devices would ever be swapped.

What capacity limit appears first when the RACO 695 is packed with conductors under sustained load?

The 22.5 cubic-inch volume governs the maximum number of conductors allowed by code, so fill calculations hit that limit before the ten concentric knockouts are exhausted.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.