Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.0091904BTC
In stock
Hubbell Incorporated
Hubbell Incorporated RACO 2918RT Compression Connector Conduit
Steel compression connector for 2 in EMT conduit, zinc-plated, insulated, rain-tight, cULus listed
- TypeConduit & Raceways
- Zinc-plated steel resists corrosion for long service life
- Compression connection on EMT conduit installs without threading tools
- Rain-tight seal protects wiring in damp locations
- Insulated throat prevents conductor damage during pulling
- cULus listing confirms compliance with safety standards
RACO 2918RT Compression Connector
The RACO 2918RT is a steel compression connector designed for 2-inch EMT conduit. It provides a rain-tight, insulated connection with a zinc-plated finish for corrosion resistance. The connector includes a clamp and meets cULus listed safety standards for electrical installations.
Ideal for EMT conduit runs needing weather
Electricians pulling 2-inch EMT in outdoor or damp locations will appreciate the rain-tight seal and insulated throat. Projects requiring set-screw couplings, non-metallic conduit, or smaller trade sizes should select a different fitting type.
Handles 2-inch EMT with included clamp
The 2-13/32-inch overall length fits standard boxes and enclosures while the compression design secures the conduit without threading. The 0.57 lb steel body resists mechanical damage but offers no additional wire-fill capacity beyond the conduit's own rating.
Highlights
- Zinc-plated steel resists corrosion for long service life
- Compression connection on EMT conduit installs without threading tools
- Rain-tight seal protects wiring in damp locations
- Insulated throat prevents conductor damage during pulling
- cULus listing confirms compliance with safety standards
Specifications
| Brand | Hubbell Wiring |
|---|---|
| Type | Conduit & Raceways |
Questions about this item
What conduit trade size must I already have for the RACO 2918RT compression connector to fit?
The connector is made for 2 in trade-size EMT conduit, so you need conduit of that exact trade size for the compression fitting to seat correctly.
Will the zinc-plated steel connector work with my existing EMT conduit that has a different finish?
Yes, the compression design clamps onto standard EMT regardless of its exterior finish, and the zinc plating on this connector provides corrosion resistance when joined to other metallic raceway components.
How can I confirm the rain-tight seal is effective after tightening the compression nut?
Inspect the gasket compression visually and tug gently on the conduit; a properly tightened nut leaves no visible gap at the connector body and the conduit will not rotate or pull out.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
