We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray zinc EMT grounding connector, compression type, 4-inch trade size

Hubbell Incorporated

Hubbell Incorporated RACO 2846 EMT Grounding Connector 4 in Compression Zinc Alloy Plain Gray

SKU CH-TPD9-H4EYB

A compression EMT grounding connector for 4-inch conduit, zinc alloy construction with CSA and UL certification, concrete-tight and straight-threaded connection

  • UL Listed and CSA Certified for code compliance
  • Zinc alloy construction resists corrosion in EMT runs
  • Compression design secures 4 in conduit without threading
  • Concrete-tight rating protects connections in slab installations
  • 97 lb weight balances strength with manageable handling

RACO 2846 EMT Grounding Connector

This compression fitting connects four-inch EMT conduit to a grounded electrical system. It is built from zinc alloy with a plain grey finish and carries CSA and UL listings for code-compliant installations.

Check conduit trade size and thread compatibility

Verify that the existing raceway is four-inch EMT and that the enclosure accepts a four-inch NPS threaded hub. The connector is not insulated and requires a straight, threaded connection orientation.

Thermals noise and power draw

As a passive metal fitting the connector generates no heat, produces no audible noise and draws no electrical power during normal operation. Its zinc body dissipates any incidental warmth from the conductors without active cooling.

Highlights

  • UL Listed and CSA Certified for code compliance
  • Zinc alloy construction resists corrosion in EMT runs
  • Compression design secures 4 in conduit without threading
  • Concrete-tight rating protects connections in slab installations
  • 97 lb weight balances strength with manageable handling

Specifications

BrandRACO

Questions about this item

What comes in the box with the RACO 2846 EMT grounding connector and is anything else needed for installation?

The connector is supplied as a single compression fitting; locknuts, bushings or conduit sections are not included and must be purchased separately.

How do I decide between the available versions of this 4 in EMT connector?

Only the plain gray zinc-alloy version with NPS threads is offered, so there is no capacity or finish choice to make.

What does the 1.97 lb weight mean when the connector is mounted in a real raceway?

It adds roughly two pounds to the conduit run, which is light enough for standard supports but should be counted in total fill calculations.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.