We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small galvanised steel conduit hanger with retained bolt, grey finish

Hubbell Incorporated

Hubbell Incorporated RACO 2053TH conduit hanger 3/4 in EMT steel galvanized

SKU CH-ZHFH-7B91W

Galvanised steel hanger secures 3/4 in EMT, IMC or rigid conduit with a retained bolt and 50 lb load capacity

  • TypeCable Management & Conduit
  • Galvanized steel resists corrosion for long outdoor life
  • Screw-on flange fits 1/8 to 1/4 in beam thicknesses
  • Holds EMT, IMC and rigid conduit up to 3/4 in trade size
  • Retained bolt speeds installation without loose parts
  • Rated to carry 50 lb static load safely

Conduit hanger for EMT 3/4 in

This steel galvanized hanger secures EMT, IMC, or RMC conduit with a trade size of 3/4 in. It mounts to flange thicknesses from 1/8 in to 1/4 in using a retained 1/4-20 bolt. The mounting hole accepts a 0.26 in fastener. Load capacity is rated at 50 lb.

Replaces loose straps or clamps

The screw-on design with a retained bolt removes the need for separate hardware during installation. It covers wire ranges from 14/2 AWG to 10/3 AWG. The upgrade is worth it when a single-piece hanger speeds up runs on beam flanges.

Galvanized finish resists corrosion

Steel construction with a galvanized coating withstands damp or outdoor environments under sustained 50 lb loads. The gray finish does not degrade under continuous mechanical stress. Dimensions are 1 1/8 in length, 23/32 in width, and 2 5/32 in height.

Highlights

  • Galvanized steel resists corrosion for long outdoor life
  • Screw-on flange fits 1/8 to 1/4 in beam thicknesses
  • Holds EMT, IMC and rigid conduit up to 3/4 in trade size
  • Retained bolt speeds installation without loose parts
  • Rated to carry 50 lb static load safely

Specifications

BrandRACO
TypeCable Management & Conduit

Questions about this item

What flange thickness range does the RACO 2053TH hanger accept?

The hanger clamps onto flanges from 1/8 in to 1/4 in thick, so measure your beam before ordering.

How do I install the RACO 2053TH and what step is often missed?

Slip the hanger over the flange, insert the retained bolt through the 0.26 in mounting hole, and tighten — forgetting to fully seat the bolt is the common error.

When should I replace the RACO 2053TH hanger?

Inspect the galvanized finish regularly; replace the hanger if corrosion appears or after any impact that could reduce its 50 lb load capacity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.