Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00935695BTC
In stock
Hubbell Incorporated
Hubbell Incorporated PS0759NGY Conduit 3/4 in 90 Degrees
A 90-degree liquid-tight conduit fitting connects 3/4 in flexible non-metallic conduit to a 3/4 in MNPT box with insulated nylon construction
- TypeCable Management & Conduit
- 90-degree orientation simplifies routing in tight spaces
- Liquid-tight seal protects wiring from moisture ingress
- Insulated throat prevents conductor damage during pull-through
- Nylon construction resists corrosion and impact
- Threaded 3/4 in connection fits standard knockout openings
3/4 in 90-degree conduit fitting
The Hubbell PS0759NGY is a liquid-tight conduit connector designed for 3/4 in trade-size flexible non-metallic conduit. It provides a 90-degree connection orientation and threads into a 3/4 in MNPT box entry for secure cable management in electrical installations.
Insulated nylon body with threaded connection
The insulated nylon construction protects conductors at the entry point while the threaded box connection ensures a reliable mechanical bond. No strain-relief mesh or external grounding lug is included, so the fitting suits standard indoor or protected outdoor runs where those features are not required.
Gray finish matches common conduit systems
The gray colour blends with typical liquid-tight non-metallic conduit for a uniform appearance. Compatible with 3/4 in knockout openings, the fitting supports orientation from 0 to 90 degrees, allowing installers to route conduit vertically or horizontally as the layout demands. Not rated for hazardous locations.
Highlights
- 90-degree orientation simplifies routing in tight spaces
- Liquid-tight seal protects wiring from moisture ingress
- Insulated throat prevents conductor damage during pull-through
- Nylon construction resists corrosion and impact
- Threaded 3/4 in connection fits standard knockout openings
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
Does the nylon body of the PS0759NGY degrade and require replacement after prolonged UV exposure?
The gray nylon construction resists typical environmental exposure; inspect periodically for cracking or discolouration and replace if the liquid-tight seal is compromised.
What is the maximum bend angle before the 3/4 in flexible conduit kinks and restricts cable pulling?
The fitting allows a 90 degree connection orientation; the conduit itself should not be bent tighter than its own minimum bend radius to avoid kinking.
How hot does the nylon fitting get when conduit runs carry continuous loads through a 3/4 in knockout all day?
Nylon remains near ambient temperature because the fitting carries no current; heat is limited to the conductors inside the conduit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
