We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular aluminium LED driver with cable glands, IP66 rated

Hubbell Incorporated

Hubbell Incorporated PLED96W-039-C2450-D LED Driver 96W 2450mA 14-39V 100-277V IP66 NEMA6 UL HL

SKU CH-FTGH-7MSGX

A 96 W constant-current LED driver delivering 2450 mA at 14-39 Vdc from a 100-277 Vac input, with IP66 and NEMA 6 aluminium housing plus UL Type HL hazardous-location rating

  • Constant 2450 mA current for stable LED output
  • 96 W maximum power handles demanding fixtures
  • 100-277 V input suits global mains supplies
  • IP66 and NEMA 6 rating resists water and dust ingress
  • UL Type HL approved for hazardous-location installations

Constant-Current LED Driver for 2450 mA Loads

This 96 W constant-current driver delivers a fixed 2450 mA output across a 14-39 Vdc range. It suits installers wiring LED arrays that require precise current regulation in dry or damp environments. The UL Type HL rating permits use in hazardous locations. Input voltage accepts 100-277 Vac nominal for broad mains compatibility.

Aluminium Housing with IP66 and NEMA6 Protection

The thermal-advantage aluminium enclosure carries IP66 and NEMA6 ratings, so the unit resists water jets and dust ingress without additional sealing. Mounting is straightforward on flat surfaces using the integral tabs. Wiring errors usually arise when the output polarity is reversed or when the load voltage falls outside the 14-39 Vdc window, causing the driver to shut down.

95.5 W Maximum Output at 2450 mA

The single figure that decides fit is the 95.5 W maximum output while maintaining 2450 mA constant current. If the connected LED array demands more power or a different current level, this driver will not operate correctly. Verify the load voltage stays within 14-39 Vdc before specifying.

Highlights

  • Constant 2450 mA current for stable LED output
  • 96 W maximum power handles demanding fixtures
  • 100-277 V input suits global mains supplies
  • IP66 and NEMA 6 rating resists water and dust ingress
  • UL Type HL approved for hazardous-location installations

Specifications

BrandHubbell

Questions about this item

How can I confirm the PLED96W-039-C2450-D is operating correctly after installation?

Measure the output with a multimeter; it should show a steady 2450 mA between 14 and 39 Vdc while the input receives 100-277 Vac.

What comes with the driver and what must I source separately?

The unit ships as a single IP66-rated aluminum housing; you will need to supply input wiring, output leads to the LED array and any dimming control wires.

Which version should I choose for a 96 W constant-current LED load?

Select this model when your array requires 2450 mA at 14-39 Vdc and a maximum of 95.5 W from a 100-277 Vac supply.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.