We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray nylon 90-degree liquid-tight conduit fitting with male NPT threads

Hubbell Incorporated

Hubbell Incorporated P1259NGY 90 Degree Conduit Fitting

SKU CH-CGEX-768GM

A 90-degree liquid-tight conduit fitting for 1-1/4 inch flexible non-metallic conduit, insulated and rated for indoor and outdoor use

  • TypeCable Management & Conduit
  • Insulated design protects conductors in damp locations
  • 90-degree elbow routes conduit around tight corners
  • Liquid-tight seal keeps moisture out of the raceway
  • Grey nylon body resists corrosion indoors and out
  • 1-1/4 in trade size fits standard knockout openings

90-Degree Liquid-Tight Conduit Fitting

This Hubbell Incorporated P1259NGY fitting connects flexible liquid-tight non-metallic conduit at a right angle. The insulated nylon body accepts a trade size of 1 1/4 inches and threads into a matching knockout. It is rated for indoor and outdoor use without a hazardous location rating. The grey connector includes no external grounding lug or strain-relief mesh.

Suited for right-angle conduit runs

Electricians routing non-metallic liquid-tight conduit around corners in damp or exposed locations will find this fitting matches the 1 1/4 inch trade size and 90-degree orientation required. Installers needing a straight connector, a different trade size, or a metallic conduit interface should select another fitting. Projects requiring hazardous-location approval or an integrated grounding lug are not served by this model.

90-degree connection orientation

The defining specification is the 90-degree connector style that changes the conduit direction at the box entry. This angle determines whether the fitting matches the installation layout. All other dimensions and compatibility details flow from this orientation combined with the 1 1/4 inch trade size.

Highlights

  • Insulated design protects conductors in damp locations
  • 90-degree elbow routes conduit around tight corners
  • Liquid-tight seal keeps moisture out of the raceway
  • Grey nylon body resists corrosion indoors and out
  • 1-1/4 in trade size fits standard knockout openings

Specifications

TypeCable Management & Conduit
BrandHUBBELL WIRING DEVICE-KELLEMS

Questions about this item

How do I install the 90 degree fitting onto flexible liquid tight non-metallic conduit, and what step is often missed?

Thread the 1 1/4 in MNPT box connection into the knockout, then tighten the compression nut onto the conduit until the ferrule grips; the step often missed is fully seating the conduit against the insulated throat before final tightening.

What maintenance or replacement will the P1259NGY fitting need over time?

Inspect the nylon body and gray insulation for cracking or UV degradation, especially in outdoor runs; replace the fitting if the compression seal no longer holds liquid tight or the threads show corrosion.

What limit appears first when the fitting is used continuously in wet or outdoor conditions?

The nylon material and insulated throat set the practical limit; prolonged exposure to sunlight, chemicals, or temperature cycling can degrade the seal before the mechanical threads fail.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.