We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue industrial pin-and-sleeve receptacle, compact flange-mount housing

Hubbell Incorporated

Hubbell Incorporated L430R9 Pin & Sleeve Receptacle 30 A 250V AC

SKU CH-WQVQ-CK2ZC

An IP22 rated pin and sleeve receptacle handles 30 A, 250 V AC three-phase power in a compact Zytel 101 nylon housing

  • TypePin & Sleeve Devices
  • Rated 30 A 250 V AC for three-phase power
  • IP22 enclosure resists limited water ingress
  • Zytel 101 nylon housing withstands –40 °C to +75 °C
  • Screw terminals accept 12–8 AWG conductors
  • Meets UL 1682, CSA C22.2 No. 182.1 and IEC 60309 standards

Industrial IEC Receptacle

The Hubbell IEC pin and sleeve receptacle provides a 30 A, 250 V AC connection in a compact IP22 enclosure. Its Zytel 101 nylon housing operates from -40 °C to +75 °C and meets CSA, UL and IEC 60309 standards for industrial power distribution.

Three-phase equipment installs

Installers wiring three-phase machinery in space-limited panels will appreciate the low-profile flange mount and screw terminals that accept 12 to 8 AWG conductors. Buyers who need higher ingress protection or a different voltage rating should select an alternative device.

30 A 250 V AC rating

The single specification that determines fit is the 30 A, 250 V AC three-phase rating; only systems designed for this exact voltage and current should use this receptacle.

Highlights

  • Rated 30 A 250 V AC for three-phase power
  • IP22 enclosure resists limited water ingress
  • Zytel 101 nylon housing withstands –40 °C to +75 °C
  • Screw terminals accept 12–8 AWG conductors
  • Meets UL 1682, CSA C22.2 No. 182.1 and IEC 60309 standards

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypePin & Sleeve Devices

Questions about this item

What plug standard must the mating connector follow to work with this L430R9 receptacle?

The receptacle is compatible with standard IEC 60309 pin and sleeve devices, so the mating plug must conform to that same IEC 60309 interface.

Will the screw terminals accept the 10 AWG cable I already have installed?

Yes. The pressure terminal screws accommodate wire sizes from 12 to 8 AWG, so 10 AWG falls within the accepted range.

How can I confirm the receptacle is correctly phased after wiring?

The blue colour-coded housing identifies the 250 V AC three-phase rating; verify each phase conductor lands on its designated terminal and that the ground follows the IEC convention marked on the device.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.