We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray aluminum conduit body, X style, 4.0 cu in

Hubbell Incorporated

Hubbell Incorporated KILLARK X17SA Conduit Body 4.0 cu in X Body

SKU CH-EG2S-SPGXS

Aluminum conduit outlet body with 4.0 cu in capacity and 1/2 in threaded hubs for IMC and RMC installations

  • TypeConduit & Raceways
  • 0 cu in capacity allows more wiring space
  • X body style enables multi-angle conduit routing
  • Aluminum construction with Duraloy 7 powder coat resists corrosion
  • Threaded 1/2 in hub fits IMC and RMC conduit
  • Rated for hazardous locations per factory specs

Conduit Body for IMC and RMC

The Hubbell Killark X17SA conduit outlet body provides a 4.0 cu in capacity for pulling and splicing conductors. Its X-style configuration allows multi-angle connection orientation. The body accepts 1/2 in trade size IMC and RMC conduit with threaded hubs.

Aluminum Construction and Hazard Rating

The body is made from aluminum with a gray powder-coated Duraloy 7 finish for corrosion resistance. Overall dimensions are 6 in length, 4 in width and 2 in height. The unit is rated for hazardous locations and uses a flat back design.

Compatible Cover and Sustained Use

A compatible 170G cover secures the enclosure for continuous service. The threaded connection and aluminum housing maintain mechanical protection and grounding integrity under sustained load. The 4 cu in volume remains constant during extended conductor fill.

Highlights

  • 0 cu in capacity allows more wiring space
  • X body style enables multi-angle conduit routing
  • Aluminum construction with Duraloy 7 powder coat resists corrosion
  • Threaded 1/2 in hub fits IMC and RMC conduit
  • Rated for hazardous locations per factory specs

Specifications

BrandKILLARK
TypeConduit & Raceways

Questions about this item

How do I thread the 1/2 in hubs on the X17SA body, and what step is often missed?

Apply thread sealant to the NPT threads, torque to the conduit-code value, then install the 170G cover with its gasket before energising the circuit.

What part will need replacement after years of service on the X17SA?

The 170G cover gasket can harden over time; replace it with the same 170G cover assembly to maintain the hazardous-location seal.

At what fill point does the X17SA body reach its limit during sustained use?

The 4.0 cu in capacity is the governing limit; total conductor volume must not exceed that figure per the applicable wiring code.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.