Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00933002BTC
In stock
Hubbell Incorporated
Hubbell Incorporated KILLARK LB17SA Conduit Body 4.0 cu in
Aluminum LB conduit outlet body with 4.0 cu in capacity and 90-degree threaded connection for 1/2 in trade size
- TypeConduit & Raceways
- Aluminum construction resists corrosion
- 0 cu in capacity fits more conductors
- 90-degree LB style changes direction cleanly
- Powder-coated gray finish protects surface
- Compatible with 170 series covers for secure closure
Conduit Body 4.0 cu in
The Hubbell KILLARK LB17SA is an aluminum conduit outlet body designed for electrical raceway systems. It provides a 90-degree directional change for threaded rigid or intermediate metal conduit in commercial and industrial installations. The gray powder-coated Duraloy 7 finish resists corrosion in harsh environments. This component suits electricians and maintenance crews running power or control wiring.
Capacity and wiring space
The body offers 4.0 cubic inches of internal volume for conductor splices and pulls. This space accommodates the fill requirements for a 1/2 inch trade size conduit run. The flat back design allows mounting against flat surfaces without additional brackets. Installations needing larger conductor counts or bigger conduit sizes will require a larger body style.
Threaded 1/2 inch hub interface
The single 1/2 inch threaded hub accepts IMC or RMC conduit with standard NPT threads. Connection orientation is fixed at 90 degrees between the hub and the cover opening. Compatible covers include the 170 series in multiple gasket and material variants. The interface does not support non-threaded conduit types or larger trade sizes without reducers.
Highlights
- Aluminum construction resists corrosion
- 0 cu in capacity fits more conductors
- 90-degree LB style changes direction cleanly
- Powder-coated gray finish protects surface
- Compatible with 170 series covers for secure closure
Specifications
| Brand | KILLARK |
|---|---|
| Type | Conduit & Raceways |
Questions about this item
Will the 1/2 in threaded hubs on this LB body mate with the existing IMC and RMC conduit I already have installed?
Yes, the 1/2 in threaded hubs are compatible with both IMC and RMC conduit types, allowing direct connection to your current raceway system.
How can I verify the LB17SA is correctly oriented after installation?
The body style LB provides a 90 degree connection orientation; confirm the conduit entries form a right angle and the flat back sits flush against the mounting surface.
Which cover is included with the 4.0 cu in aluminum body, or do I need to order a 170 series cover separately?
The conduit body is sold without a cover; you must purchase a compatible 170, 170C, 170CG, 170CGSA, 170CSA, 170G, 170GSA or 170SA cover separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
