We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue thermoplastic IEC pin-and-sleeve receptacle with spring-loaded cap, 4.15 in face diameter, IP67 watertight

Hubbell Incorporated

Hubbell Incorporated IEC Pin and Sleeve Receptacle 60A 208V HBL560R9W

SKU CH-HQHS-ZR71Z

Watertight IEC pin-and-sleeve receptacle rated 60 A at 208 V with IP67 protection and a spring-loaded cap

  • Color/FinishBlue
  • Color MappingBlue
  • TypeLight Switch
  • Watertight IP67 enclosure protects against dust and water ingress
  • 60 A current rating supports heavy-duty industrial loads
  • 120/208 V AC voltage rating suits three-phase power systems
  • Spring-loaded cap maintains seal when receptacle is not in use
  • Thermoplastic housing resists impact and chemical exposure

60 A 120/208 V IEC Pin and Sleeve Receptacle

This 60 A IEC pin and sleeve receptacle is rated for 120/208 V AC single-phase power and carries a 15 hp motor rating. It suits industrial facilities that need a watertight connection for heavy-duty equipment. The blue thermoplastic housing provides corrosion resistance in harsh environments.

IP67 and NEMA 4X Watertight Construction

The flanged body meets IP67 and NEMA 4X ratings, so the receptacle withstands wash-downs and outdoor exposure. A spring-loaded cap seals the face when the plug is removed, maintaining the ingress protection. The straight orientation and 4.15 in face diameter simplify panel layout.

Verify 1/0 AWG Maximum Wire and 60 A Circuit

Confirm that your installation can accommodate conductors up to 1/0 AWG and that the branch circuit is protected at 60 A. The receptacle provides two poles, three wires and a grounded IEC configuration. Ensure the mounting surface accepts a single-gang flanged device.

Highlights

  • Watertight IP67 enclosure protects against dust and water ingress
  • 60 A current rating supports heavy-duty industrial loads
  • 120/208 V AC voltage rating suits three-phase power systems
  • Spring-loaded cap maintains seal when receptacle is not in use
  • Thermoplastic housing resists impact and chemical exposure

Specifications

BrandHUBBELL
Color/FinishBlue
Color MappingBlue
TypeLight Switch

Questions about this item

What voltage range does the IEC 60 A receptacle support in practice?

The receptacle is rated for 120/208 V AC single-phase operation, so the 208 V figure caps the maximum line-to-line voltage you can apply.

What mounting footprint does the 4.15 in face diameter require?

The flanged body needs a cut-out that accommodates a 4.15 in diameter face plus the four flange holes; the flange sits proud of the panel.

How is the spring-loaded cap installed, and what step is often missed?

The cap snaps onto the receptacle flange after wiring; the step often missed is tightening the gland nut before closing the cap so the IP67 seal engages.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.