We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray round Cat 6 Ethernet cable with clear RJ45 boots, 20 ft length

Hubbell Incorporated

Hubbell Incorporated HC6GY20 Cat 6 Ethernet Cable Gray 20 ft

SKU CH-FQS8-Q9776

A 20 ft Cat 6 patch cord with RJ45 connectors and clear boots for 10 GBps data transmission

  • TypeData & Communication
  • Cat 6 performance supports 10 Gbps transmission speed
  • 20 ft length provides flexible device placement
  • Unshielded PVC jacket meets CM fire rating
  • 24 AWG conductors with clear boots ensure durability
  • ANSI/TIA/EIA-568-C.2 and ISO 11801 standards compliant

Hubbell Cat 6 Patch Cord 20 ft

This 20-foot Category 6 patch cord carries voice and data signals between network devices such as switches, routers and wall outlets. It is intended for installers and IT staff who need a manufactured, standards-compliant link for Gigabit and 10 Gbps Ethernet runs in commercial or home offices.

Verify RJ45 ports and pathway length

Confirm that both ends of your link accept standard RJ45 connectors with clear boots. Measure the cable route to ensure a 20-foot length reaches without tension or sharp bends. Check that the pathway meets commercial fire-rating requirements for CM-rated PVC jacketed cable.

Unshielded PVC cable runs cool and silent

The unshielded 24 AWG conductors inside a 0.2-inch PVC jacket carry 10 Gbps traffic with no active components, so the cord produces no heat or noise of its own. Power draw is limited to the negligible loss of passive copper, and the CM fire rating satisfies typical commercial installation codes.

Highlights

  • Cat 6 performance supports 10 Gbps transmission speed
  • 20 ft length provides flexible device placement
  • Unshielded PVC jacket meets CM fire rating
  • 24 AWG conductors with clear boots ensure durability
  • ANSI/TIA/EIA-568-C.2 and ISO 11801 standards compliant

Specifications

BrandHUBBELL PREMISE WIRING
TypeData & Communication

Questions about this item

Does the 20 ft Cat 6 cable arrive with both RJ45 ends already terminated or do I need to buy plugs separately?

The patch cord ships with RJ45 connectors on both ends, each protected by a clear boot, so no additional plugs or crimping tools are required.

Should I choose the shielded or unshielded version of this HC6GY20 cable for a typical office run?

This specific model is unshielded (UTP) and meets ANSI/TIA/EIA-568-C.2 and ISO 11801/60603-7-41 for standard commercial installations.

Will the 10 GBps rating on this 24 AWG cable hold up at the full 20 ft length in a real network?

Yes, the 20 ft length is well within the Cat 6 channel limit, so the 10 GBps transmission speed is supported across the full run.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.