Hubbell Incorporated
Hubbell Incorporated HC6BK10 Cat 6 Ethernet Cable Black 10 ft
Cat 6 patch cord with RJ45 connectors, 10 ft black PVC jacket, 24 AWG conductors, rated for 10 GBps transmission
- TypeWire & Cable
- Color MappingBlack
- MaterialHAWA
- Cat 6 performance supports 10 GBps transmission speed
- 24 AWG conductors ensure reliable signal integrity
- Clear boots on both RJ45 ends protect connector tabs
- PVC jacket with CM fire rating meets commercial standards
- 10 ft length suits typical workstation-to-panel connections
Cat 6 Patch Cord for Voice and Data
This 10 ft round patch cord uses 24 AWG conductors and RJ45 connectors on both ends. It is built to Category 6 performance and carries a CM fire rating for commercial installations. The black PVC jacket measures 0.2 in diameter and meets ANSI/TIA/EIA-568-C.2 and ISO 11801/60603-7-41 standards.
Practical Limits of the Cat 6 Standard
The cable supports transmission speeds up to 10 GBps over its rated length. As an unshielded design, it is intended for environments where electromagnetic interference is low. It complies with EU RoHS requirements and NEC Article 800 for communications circuits. Installers should observe the standard's maximum channel length guidelines for the target application.
Clear Boots and PVC Construction
Each end features a clear boot that protects the RJ45 latch during repeated insertion and removal. The PVC jacket and insulation resist wear in typical office or rack settings. The unshielded construction keeps the cable flexible for routing through cable managers or around corners. Buyers who need shielded pairs for noisy industrial areas should select a different cable type.
Highlights
- Cat 6 performance supports 10 GBps transmission speed
- 24 AWG conductors ensure reliable signal integrity
- Clear boots on both RJ45 ends protect connector tabs
- PVC jacket with CM fire rating meets commercial standards
- 10 ft length suits typical workstation-to-panel connections
Specifications
| Type | Wire & Cable |
|---|---|
| Brand | Hubbell Premise Wiring |
| Color Mapping | Black |
| Material | HAWA |
Questions about this item
Should I choose the 10 ft length or a different size for my patch panel run?
The cable supplied here is 10 ft overall; measure your rack-to-device distance and add slack before deciding if a longer or shorter patch cord fits better.
What does the 10 GBps transmission speed mean when I plug this into my switch?
It indicates the cord meets Category 6 performance for 10GBASE-T over short links; actual throughput depends on your switch ports, NICs and the complete channel length.
Which standards does the RJ45 interface comply with and what do they limit?
The connectors follow ANSI/TIA/EIA-568-C.2 and ISO 11801/60603-7-41, ensuring Category 6 component compliance for 10 Gbps Ethernet up to the rated channel distance.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Laird Technologies Phantom Multi-Band Antenna 698-2700 MHz NMO Black
- Antenna
Unique-Bargains RG174 SMA Female to Male Antenna Extension Cable 9M
- HI - Antennas, Wire…



