We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hubbell Incorporated

Hubbell Incorporated HC6BK03 Cat 6 Patch Cord 3 ft Black Clear Boot

SKU CH-GWMF-P2M3X

Category 6 patch cord with RJ45 connectors, 3 ft length, black PVC jacket, clear boots, 24 AWG conductors, 10 Gbps transmission speed

  • TypeWire & Cable
  • Color MappingBlack
  • Cat 6 performance supports 10 GBps transmission speed
  • Clear boots on both ends protect RJ45 connectors
  • 3 ft length suits short rack or desk runs
  • 24 AWG conductors with PVC jacket meet CM fire rating
  • Compliant with ANSI/TIA 568-C.2 and ISO 11801 standards

Hubbell Cat 6 Patch Cord 3 ft

This Hubbell Premise Wiring patch cord provides a Category 6 connection for voice and data networks. It uses 24 AWG conductors inside a black PVC jacket with clear boots on both RJ45 ends. The three foot length suits short rack or desk links.

Practical limits of the Cat 6 standard

The cable meets ANSI/TIA/EIA-568-C.2 and ISO 11801/60603-7-41 specifications for unshielded twisted pair. It supports transmission speeds up to 10 GBps over its full length. The CM fire rating covers general commercial installations.

What to check before ordering

Verify that a three foot reach fits the distance between your patch panel and switch or wall outlet. Confirm that RJ45 connectors match the ports on your existing equipment. Ensure the unshielded design matches the cabling standard used in the rest of the run.

Highlights

  • Cat 6 performance supports 10 GBps transmission speed
  • Clear boots on both ends protect RJ45 connectors
  • 3 ft length suits short rack or desk runs
  • 24 AWG conductors with PVC jacket meet CM fire rating
  • Compliant with ANSI/TIA 568-C.2 and ISO 11801 standards

Specifications

TypeWire & Cable
BrandHUBBELL PREMISE WIRING
Color MappingBlack

Questions about this item

Should I choose the 3 ft black Cat 6 patch cord with clear boots or a different length?

This specific cord is 3 ft long with black jacket and clear boots on both RJ45 ends; select a different length only if your cable run requires more or less slack.

What does the 10 GBps transmission speed mean when the cord is installed in a real network?

The cord supports up to 10 Gbps over its 3 ft length when used with Cat 6 rated hardware and proper termination.

Which interface standard does the RJ45 connector follow and what performance does it cap?

The RJ45 plugs comply with ANSI/TIA/EIA-568-C.2 and ISO/IEC 11801/60603-7-41, limiting the link to Cat 6 performance.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.