We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue Cat6 slim patch cord 3 ft with clear RJ45 boots

Hubbell Incorporated

Hubbell Incorporated HC6B03 Cat6 Slim Patch Cord Blue 3 ft

SKU CH-KS71-P10MD

A 3 ft Category 6 patch cord with RJ45 connectors on each end, rated for 10 Gbps transmission and compliant with ANSI/TIA-568-C.2 and ISO 11801 standards

  • TypeWire & Cable
  • Color MappingBlue
  • Slim 0.2 in diameter fits tight cable runs
  • Cat6 rated for 10 GBps transmission speed
  • 3 ft length suits short rack connections
  • Meets ANSI/TIA-568-C.2 and ISO 11801 standards
  • PVC jacket with CM fire rating for commercial use

Cat6 Slim Patch Cord 3 ft

The Hubbell HC6B03 is a 3 ft Category 6 patch cord with RJ45 connectors on both ends. It is designed for voice and data links up to 10 GBps in commercial installations. The slim 0.2 in diameter reduces bundle bulk in dense racks. Clear boots protect the latch tabs during frequent moves.

Check connector spacing and jacket rating

Verify that the 3 ft length reaches between your patch panel and switch ports without tension. Confirm the CM fire rating satisfies local code for the intended pathway. Ensure the 24 AWG conductors match the termination blocks you plan to punch down.

Fits standard RJ45 ports and frees rack space

The cord plugs directly into any RJ45 jack on switches, panels or wall outlets. Its reduced diameter leaves more room in cable managers and improves airflow around active gear. RoHS compliance and ANSI/TIA/EIA-568-C.2 certification support regulated projects.

Highlights

  • Slim 0.2 in diameter fits tight cable runs
  • Cat6 rated for 10 GBps transmission speed
  • 3 ft length suits short rack connections
  • Meets ANSI/TIA-568-C.2 and ISO 11801 standards
  • PVC jacket with CM fire rating for commercial use

Specifications

TypeWire & Cable
BrandHUBBELL PREMISE WIRING
Color MappingBlue

Questions about this item

Does the HC6B03 patch cord come with both RJ45 ends already terminated, or do I need to crimp connectors myself?

Both ends are factory-terminated with RJ45 connectors and clear boots, so the cable is ready to plug in without any crimping.

The listing shows a single 3 ft length — are other lengths or colours available under the same HC6B03 model?

The HC6B03 part number identifies this specific 3 ft blue cable; other lengths or jacket colours carry different part numbers.

The spec says 10 GBps transmission speed — will I actually see 10 Gbps throughput on a typical Cat6 network switch?

The cord meets ANSI/TIA-568-C.2 Category 6 and ISO 11801 requirements, supporting 10 Gbps signalling up to the standard channel limits when used with compliant hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.