We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Hubbell Incorporated

Hubbell Incorporated HBL9309 Straight Blade Plug 5-30P 30 A 125V video accessory

SKU CH-9SGT-X23GH

Angled straight-blade plug rated 30 A, 125 V with screw terminals for cables 0.625 to 1.187 in

  • TypeStraight Blade Devices
  • ColorBlack
  • Rated for 30 A continuous current at 125V AC
  • Angled straight-blade design eases routing in tight spaces
  • Screw-terminal connections accept cables from .625 in to 1.187 in diameter
  • Corrosion-resistant construction with UL 94 V-2 flammability rating
  • NEMA 5-30P three-blade grounded plug for single-phase power

Hubbell HBL9309 30 A 125 V plug

This straight-blade plug handles 30 A at 125 V AC and suits equipment requiring a NEMA 5-30P connection. The angled housing eases cable routing in tight spaces. Screw terminals accept conductors sized for the rated current. The black housing carries a UL 94 V-2 flammability rating.

Replacing worn 5-30P plugs on 30 A cords

Swap this in when an existing 5-30P plug shows heat damage, loose blades or cracked insulation. The IP20-rated body resists dust ingress and the corrosion-resistant finish suits damp environments. The 2 hp motor rating covers typical workshop tools. The jump is worth it when the original plug no longer seats securely.

Verify cable diameter and wiring style

Confirm the cord outer diameter falls between .625 in and 1.187 in so the strain relief seals properly. Ensure the appliance uses single-phase 125 V wiring with a ground conductor. The device is polarized; match hot, neutral and ground to the marked terminals. No other interface or protocol applies.

Highlights

  • Rated for 30 A continuous current at 125V AC
  • Angled straight-blade design eases routing in tight spaces
  • Screw-terminal connections accept cables from .625 in to 1.187 in diameter
  • Corrosion-resistant construction with UL 94 V-2 flammability rating
  • NEMA 5-30P three-blade grounded plug for single-phase power

Specifications

BrandHubbell Wiring Device-Kellems
ModelHBL9309
TypeStraight Blade Devices
ColorBlack

Questions about this item

What cable diameter range does the HBL9309 straight blade plug accept?

The plug accepts cables from .625 in to 1.187 in outer diameter.

How do you wire the HBL9309 plug and what is the common mistake?

Loosen the three screw terminals, insert stripped conductors under each clamp, and tighten securely; the frequent error is reversing the hot and neutral blades.

When should the HBL9309 plug be replaced?

Replace it if the housing cracks, blades bend, screw terminals strip, or the V-2 rated body shows heat discoloration.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.