We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory duplex receptacle with illuminated face and two LEDs

Hubbell Incorporated

Hubbell Incorporated HBL8200ILI 15A 125V Duplex Receptacle Ivory

SKU CH-M7XS-1Q5ZZ

A 15 A, 125 V hospital-grade duplex receptacle with illuminated face, four-point grounding and back/side wiring for #14–#10 AWG copper

  • Color MappingIvory
  • TypeWiring Devices
  • Hospital-grade reliability meets UL498 and CSA C22.2 No.42 standards
  • Illuminated face with two LEDs improves visibility in low-light conditions
  • Four-point grounding system enhances safety in demanding environments
  • Impact-resistant polycarbonate housing withstands temperatures from -40°C to +75°C
  • Back and side wiring terminals accept #14 to #10 AWG copper wire

Hospital-grade 15A duplex receptacle

The Hubbell HBL8200ILI is a 15 A, 125 VAC duplex outlet built to hospital-grade UL 498 requirements. Its impact-resistant polycarbonate housing and nickel-plated brass contacts suit demanding indoor, dry-location installations. Two LEDs illuminate the entire face for clear visibility in low light.

Upgrade from standard residential outlets

This receptacle replaces basic 5-15R devices when a four-point grounding system and dielectric strength of 2,000 V are required. The jump is worth it in healthcare, commercial or high-traffic areas where CSA C22.2 No. 42 and Federal Specification W-C-596 compliance are specified. Standard outlets lack the illuminated face and reinforced grounding.

Back and side wiring with #14–#10 AWG copper

Screw terminals accept both back and side wiring for #14 to #10 AWG copper conductors only. The NEMA 5-15R configuration limits the circuit to 15 A at 125 VAC. Operating temperature ranges from -40 °C to +75 °C without impact. Aluminium wire, higher amperage loads or outdoor wet locations are not supported.

Highlights

  • Hospital-grade reliability meets UL498 and CSA C22.2 No.42 standards
  • Illuminated face with two LEDs improves visibility in low-light conditions
  • Four-point grounding system enhances safety in demanding environments
  • Impact-resistant polycarbonate housing withstands temperatures from -40°C to +75°C
  • Back and side wiring terminals accept #14 to #10 AWG copper wire

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
Color MappingIvory
TypeWiring Devices

Questions about this item

What box depth or wall opening does the HBL8200ILI duplex receptacle need?

The device fits a standard US single-gang box; its compact polycarbonate body and screw terminals accept #14 to #10 AWG copper wire in both back and side wiring positions.

Which wiring step is most often done incorrectly when installing this 15 A 125 V receptacle?

Forgetting to connect the grounding conductor to the four-point grounding system; the green screw must be used for a solid ground path.

When should the illuminated face LEDs be checked or the receptacle replaced?

If the two LEDs no longer glow when the circuit is live, the internal illumination circuit has failed and the unit should be replaced; the housing is rated for -40 °C to +75 °C operation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.