We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow thermoplastic elastomer watertight locking receptacle rectangular flange straight orientation

Hubbell Incorporated

Hubbell Incorporated HBL69W74 Watertight Locking Receptacle

SKU CH-8SN5-ZMM3M

Watertight locking receptacle rated 30 A, 125/250 V AC, NEMA L14-30R, three-phase, four-wire screw terminals, NEMA 12/4/4X/6/6P enclosure, yellow thermoplastic housing, flush-mount rectangular flange

  • TypeWatertight Devices
  • Watertight protection rated NEMA 4, 4X, 6, 6P
  • 30 A, 125/250 V AC three-phase locking receptacle
  • Yellow thermoplastic elastomer housing resists impact and chemicals
  • Flush-mount rectangular flange simplifies panel installation
  • Screw-terminal wiring accepts four conductors for secure connection

HBL69W74 Watertight Locking Receptacle

This Hubbell Incorporated HBL69W74 is a NEMA L14-30R flanged receptacle rated for 30 A at 125/250 V AC. It provides a straight, flush-mount connection with screw terminals for four wires in a three-pole configuration. The yellow thermoplastic elastomer housing meets NEMA 12, 4, 4X, 6 and 6P enclosure ratings for watertight performance. It suits industrial and commercial power distribution where locking safety is required.

Three-phase 125/250 V AC equipment up to 30 A

Installers wiring three-phase loads at 125/250 V AC with a NEMA L14-30P plug will find the correct polarised, straight-orientation interface here. It is not for single-phase 125 V only circuits, for 250 V only delta loads, or for applications needing a shrouded housing or AFCI protection. Builders requiring a different NEMA configuration, higher amperage, or a non-flanged mount should select another device.

NEMA L14-30R configuration decides fit

The single specification that confirms compatibility is the NEMA L14-30R receptacle configuration, which accepts only a matching NEMA L14-30P locking plug. Voltage must be 125/250 V AC three-phase, current must not exceed 30 A, and wiring must use four conductors with screw terminals. If the plug or the circuit differs, this receptacle will not connect.

Highlights

  • Watertight protection rated NEMA 4, 4X, 6, 6P
  • 30 A, 125/250 V AC three-phase locking receptacle
  • Yellow thermoplastic elastomer housing resists impact and chemicals
  • Flush-mount rectangular flange simplifies panel installation
  • Screw-terminal wiring accepts four conductors for secure connection

Specifications

BrandHUBBELL
TypeWatertight Devices

Questions about this item

How can I verify the Hubbell HBL69W74 receptacle is wired correctly after installation?

Apply power and measure 125/250V AC across the L14-30R terminals with a multimeter; the three-pole, four-wire screw terminals should show proper phase polarity under a 30 A load.

What components are included with the HBL69W74 and what must be purchased separately?

The yellow thermoplastic elastomer flanged receptacle with NEMA 12, 4, 4X, 6, 6P rating ships as a single-gang unit; mounting hardware, conduit fittings and a matching L14-30P plug are sold separately.

Which NEMA configuration and amperage version of this watertight locking receptacle should I select?

Choose the L14-30R configuration rated 30 A, 125/250V AC, three-phase, four-wire, polarized, straight orientation with screw terminals for standard 30 A three-phase loads.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.