We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Yellow watertight receptacle with flip-up cover, flush mount

Hubbell Incorporated

Hubbell Incorporated HBL60W48 60A 48V Watertight Receptacle 250V

SKU CH-095G-A5PXA

A 20 A, 250 V watertight receptacle with a flip-up cover and moisture-resistant PBT polyester housing for wet or outdoor locations

  • TypeWiring Devices
  • Watertight protection for wet environments
  • 20 A current rating supports standard circuits
  • CSA, NSF and UL listed for safety compliance
  • PBT polyester housing resists moisture and UV
  • Flush-mount design with flip-up cover

Watertight Receptacle for 250V Applications

This Hubbell HBL60W48 watertight receptacle is rated for 250V and 60A service with a NEMA 6-20R configuration. It suits industrial or outdoor locations where moisture and UV exposure demand a sealed, grounded connection. The yellow PBT polyester housing resists corrosion and sunlight degradation. Polarised, single-gang design accepts three-wire, single-phase loads.

Flip-Up Cover and Certified Construction

A spring-loaded flip-up cover protects the contacts when the receptacle is not in use. The assembly carries UL listing, CSA certification and NSF approval for sanitary environments. Moisture-resistant and UV-resistant materials maintain integrity in wash-down areas. No GFCI function is included, so downstream protection must be provided separately if required by code.

Flush-Mount Installation Notes

The unit mounts flush in a standard single-gang box using the supplied hardware. Straight connection orientation simplifies wire routing in tight enclosures. Installers should verify that the 20A current rating matches the branch-circuit breaker and that the 6-20R blade pattern matches the plug. Mismatched NEMA configurations are the most common cause of fitment issues.

Highlights

  • Watertight protection for wet environments
  • 20 A current rating supports standard circuits
  • CSA, NSF and UL listed for safety compliance
  • PBT polyester housing resists moisture and UV
  • Flush-mount design with flip-up cover

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeWiring Devices

Questions about this item

How often should the flip-up cover seal on this HBL60W48 receptacle be inspected or replaced?

The PBT polyester housing and flip-up cover are built for moisture and UV resistance, so the seal typically lasts years; inspect annually and replace only if cracking or hardening is visible.

What is the maximum continuous current this 6-20R receptacle can handle before the 20 A rating becomes the limiting factor?

The device is rated for 20 A continuous; sustained loads above that will exceed the NEMA 6-20R configuration and UL listing limits.

Does the yellow PBT polyester housing run noticeably warm when the receptacle carries a full 20 A load all day?

The housing is moisture and UV resistant but not a heatsink; at 20 A the terminals may warm slightly, yet the enclosure itself stays near ambient temperature.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.