Hubbell Incorporated
Hubbell Incorporated HBL5461 Straight Blade Receptacle 6-20R 20 A Brown
A 20 A, 6-20R straight-blade receptacle with a grounded, impact-resistant nylon body in brown for flush mounting
- Color MappingBrown
- TypeWiring Devices
- Grounded 20 A outlet for safe power delivery
- Impact-resistant nylon housing withstands rough handling
- CSA C22.2 No. 42 and UL 498 certified for code compliance
- NEMA 6-20R configuration fits standard 20 A plugs
- Single-gang flush mount simplifies wall-box installation
Hubbell HBL5461 Straight-Blade Receptacle
The Hubbell HBL5461 is a single-gang straight-blade receptacle rated 20 A. It features a grounded 6-20R configuration with three wires and two poles in a brown nylon housing. The flush-mount unit carries UL 498 and CSA C22.2 No. 42 certifications.
Suited for 20 A single-phase circuits needing
Electricians wiring 20 A single-phase loads will find the NEMA 6-20R configuration and grounded design appropriate. Installers requiring GFCI protection, a different NEMA configuration or a cover plate included must look elsewhere.
Key spec: NEMA 6-20R 20 A single receptacle
The defining detail is the NEMA 6-20R rating, which determines voltage and plug compatibility for the circuit. Verify the circuit matches this configuration before purchase.
Highlights
- Grounded 20 A outlet for safe power delivery
- Impact-resistant nylon housing withstands rough handling
- CSA C22.2 No. 42 and UL 498 certified for code compliance
- NEMA 6-20R configuration fits standard 20 A plugs
- Single-gang flush mount simplifies wall-box installation
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|---|
| Color Mapping | Brown |
| Type | Wiring Devices |
Questions about this item
Does the 20 A straight-blade receptacle run hot when supplying a continuous load all day?
The device is rated for 20 A single-phase service and built to UL 498 and CSA C22.2 No. 42 standards; normal operation at or below its rated current stays within the temperature limits those standards require.
What wiring must already be in place for this flush-mount receptacle to install correctly?
A 3-wire single-phase circuit with a grounded conductor and a standard NEMA 6-20R outlet box is required for the 2-pole, 3-wire configuration.
Will this brown nylon receptacle fit in a metal wall box that previously held an older NEMA device?
Yes — the flush-mount, single-gang housing follows the NEMA WD-6 dimensional standard, so it matches existing boxes cut for that pattern.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



