We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue industrial IEC pin and sleeve connector, straight watertight body, 60A 250V rating

Hubbell Incorporated

Hubbell Incorporated HBL460C9W IEC Pin and Sleeve Connector 60A 250V

SKU CH-YDRH-2JZD5

Watertight IEC pin-and-sleeve connector rated 60 A, 250 V AC with IP68/IP69K protection, Zytel 801 nylon body, and cable range .5–1.45 in

  • Color/FinishBlue
  • Color MappingBlue
  • TypeLight Switch
  • Watertight IP68/IP69K rating protects against harsh industrial environments
  • 60A 250V three-phase rating delivers high-capacity power connections
  • Zytel 801 nylon body with V-0 flammability rating ensures rugged durability
  • Accepts .5 to 1.45 in cables with 8 AWG to 2 AWG wire range
  • Straight IEC grounding design with spring-loaded self-closing gasket cover

Industrial Three-Phase Connector

The Hubbell HBL460C9W is a watertight IEC pin and sleeve connector rated for 60 amps at 250V AC. Its Zytel 801 nylon body and PBT housing achieve IP68 and IP69K protection alongside a NEMA Type 4X enclosure rating. The straight-bodied device accepts cable diameters from .5 to 1.45 inches and wire sizes from 8 AWG to 2 AWG via screw terminals. A spring-loaded self-closing gasket cover and external cord grip provide sealing and strain relief.

Suits Fixed Industrial Installations

This connector suits facilities wiring three-phase equipment where a grounded four-wire IEC configuration is specified and environmental sealing is mandatory. The V-0 flammability rating per UL94 supports compliance in hazardous-location panels. Installations requiring a lower amperage rating, a different voltage class, or a reverse-service inlet should look at other devices in the range.

60A 250V Three-Phase Rating

The single specification that decides fitment is the 60 amp, 250V AC three-phase rating combined with the IEC grounding style. Only systems designed for this exact current, voltage and pin configuration can use the HBL460C9W safely.

Highlights

  • Watertight IP68/IP69K rating protects against harsh industrial environments
  • 60A 250V three-phase rating delivers high-capacity power connections
  • Zytel 801 nylon body with V-0 flammability rating ensures rugged durability
  • Accepts .5 to 1.45 in cables with 8 AWG to 2 AWG wire range
  • Straight IEC grounding design with spring-loaded self-closing gasket cover

Specifications

BrandHUBBELL
Color/FinishBlue
Color MappingBlue
TypeLight Switch

Questions about this item

What cable diameter range does the HBL460C9W connector accept?

The connector accepts cable diameters from 0.5 inches to 1.45 inches.

How are the screw terminals wired on the HBL460C9W and what common step is missed?

The four-wire IEC grounding configuration uses screw terminals for three poles plus ground; the step often missed is fully seating each conductor under the terminal screw before torquing to ensure a gas-tight connection.

When should the spring-loaded gasket cover on the HBL460C9W be replaced?

Replace the spring-loaded gasket cover if the seal no longer closes automatically or shows cracking, as the IP68/IP69K rating depends on an intact gasket.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.