We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black thermoplastic IEC pin-and-sleeve receptacle with spring-loaded cap, IP67 watertight, 30 A 600 V three-phase, 3.6 in face diameter

Hubbell Incorporated

Hubbell Incorporated HBL430R5W 30A 600V IEC Pin and Sleeve Receptacle

SKU CH-TMQ6-1XTH6

IEC pin-and-sleeve receptacle rated 30 A, 600 V AC with IP67 watertight protection and spring-loaded cap for industrial three-phase power connections

  • Color/FinishBlack
  • Color MappingBlack
  • TypeLight Switch
  • IP67 watertight protection for harsh environments
  • 30 A, 600 V AC rating handles heavy industrial loads
  • Spring-loaded cap seals automatically after disconnect
  • Thermoplastic housing resists impact and chemicals
  • Accepts 12–8 AWG wire for flexible installation

Industrial IEC Receptacle

This Hubbell HBL430R5W is a watertight IEC pin-and-sleeve receptacle rated for 30 A and 600 V AC three-phase power. Its IP67 and NEMA 4X ratings plus a spring-loaded cap suit outdoor or wash-down environments where moisture and debris are present.

Installers needing 30 A three-phase connections

Electricians wiring motor loads up to 10 hp within the 12 AWG to 8 AWG wire range will find the straight flanged body and shrouded contacts convenient. Projects requiring single-phase service, a different amperage, or a non-IEC pin layout cannot use this device.

30 A 600 V three-phase rating

The receptacle is built for exactly 30 amperes at 600 volts AC across three phases with four wires. Verify that the circuit breaker, conductor size and load match these values before installation.

Highlights

  • IP67 watertight protection for harsh environments
  • 30 A, 600 V AC rating handles heavy industrial loads
  • Spring-loaded cap seals automatically after disconnect
  • Thermoplastic housing resists impact and chemicals
  • Accepts 12–8 AWG wire for flexible installation

Specifications

BrandHUBBELL
Color/FinishBlack
Color MappingBlack
TypeLight Switch

Questions about this item

What wire sizes fit the 30 A 600 V receptacle terminals?

The terminals accept copper conductors from 12 AWG up to 8 AWG; strip to the length marked on the device and torque to the value printed on the label.

Which mounting pattern matches the 3.6 in face diameter?

The single-gang flanged body uses a standard 3.6 in bolt circle; align the four mounting holes with the panel cut-out and secure with the supplied hardware.

When should the spring-loaded cap and IP67 seals be inspected or replaced?

Check the cap hinge, gasket and locking ring at least once a year or after any high-pressure wash-down; replace the cap assembly if the spring no longer seats the cover flush or the seal shows cracks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.