We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue polycarbonate surface-mount receptacle with four outlets

Hubbell Incorporated

Hubbell Incorporated HBL420S Blue Receptacle 20A 125V

SKU CH-8BBF-P616Q

A 20 A, 125 V blue receptacle with surge suppression rated at 80 joules and 6500 A per mode, plus triple-wipe contacts and break-off tabs for split wiring

  • TypeLight Switch
  • Color/FinishBlue
  • Color MappingBlue
  • 20 A 125 V rating powers demanding equipment
  • Blue polycarbonate housing resists impact and contaminants
  • 240 joules per mode surge suppression protects connected devices
  • Triple-wipe contacts ensure reliable electrical connection
  • Break-off tabs allow flexible split-circuit wiring

Blue 20 A 125 V Receptacle

The Hubbell HBL420S is a surface-mount receptacle rated for 20 A at 125 V AC. Its blue polycarbonate housing encloses surge-suppression circuitry rated at 80 joules and 6 500 A per mode, with two 22 mm square MOVs delivering 240 joules of protection for each mode. A nylon component shield guards the conformally coated glass-epoxy board against moisture and contaminants.

Installers needing surge-protected power points

Electricians wiring workshops, garages or light-industrial benches where transient suppression is required will find the device suitable. The three-conductor feed energises all four outlets and break-off tabs allow split-circuit wiring. Buyers who need higher joule ratings, different voltage ratings or panel-mount form factors should look at other models.

Anchor-hole terminals and triple-wipe contacts

Anchor holes with loop features secure solid wire for fast terminations, while triple-wipe contacts improve connection reliability over time. The accessible break-off tabs simplify conversion to split-circuit operation without special tools. These features reduce installation time and help maintain consistent contact pressure in vibration-prone locations.

Highlights

  • 20 A 125 V rating powers demanding equipment
  • Blue polycarbonate housing resists impact and contaminants
  • 240 joules per mode surge suppression protects connected devices
  • Triple-wipe contacts ensure reliable electrical connection
  • Break-off tabs allow flexible split-circuit wiring

Specifications

TypeLight Switch
BrandHUBBELL WIRING DEVICE-KELLEMS
Color/FinishBlue
Color MappingBlue

Questions about this item

Does the HBL420S need a 20 A circuit breaker and 12 AWG wiring to operate at its 20 A rating?

Yes, a 20 A branch circuit protected by a 20 A breaker and wired with 12 AWG conductors is required for the receptacle to deliver its full 20 A 125 V capacity.

Will the triple-wipe contacts and break-off tabs on the HBL420S work with the solid copper wire already in my existing boxes?

The anchor-hole and loop terminals accept solid copper wire for fast termination, and the break-off tabs allow split-circuit wiring with the existing conductors.

How do I confirm the 80 joule surge suppression is active after I wire the HBL420S?

The built-in indicator lights illuminate when the MOV protection is functional; if the lights are off, the surge circuit has sacrificed itself and the receptacle should be replaced.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.