We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray watertight pin and sleeve connector with aluminum shroud

Hubbell Incorporated

Hubbell Incorporated HBL4100CS2W 100A 600V AC Pin and Sleeve Connector

SKU CH-JP8A-KKXDB

Watertight 100 A, 600 V AC pin-and-sleeve connector with Valox 357 housing and dedicated ground pin

  • Color/FinishGray
  • Color MappingGray
  • TypeLight Switch
  • Watertight NEMA 4X rating protects connections in harsh environments
  • 100 A 600 V AC capacity handles heavy-duty industrial loads
  • Valox 357 housing with aluminum shroud resists impact and corrosion
  • Dedicated ground pin ensures safe grounding on every connection
  • Certified to UL CSA IEC 60309 standards for code compliance

Industrial Power Connector

The Hubbell HBL4100CS2W is a 100 amp pin and sleeve connector rated for 600V AC and 250V DC. It uses a Valox 357 housing with an aluminum shroud for durability in harsh environments. The four-wire, three-pole design includes a dedicated ground pin for safety.

Suits Heavy-Duty Applications

This connector fits industrial machinery and power distribution systems needing watertight, abuse-resistant connections. It meets NEMA 4X, CSA, IEC 60309 and UL standards for reliable outdoor or wash-down use. Buyers needing switch-rated devices or lower amperage ratings should look elsewhere.

100 Amp 600V AC Rating

The 100 amp, 600V AC rating is the primary specification that determines compatibility with your power system. Verify your circuit amperage and voltage match these values exactly before installation. The three-phase, four-wire configuration must also align with your wiring scheme.

Highlights

  • Watertight NEMA 4X rating protects connections in harsh environments
  • 100 A 600 V AC capacity handles heavy-duty industrial loads
  • Valox 357 housing with aluminum shroud resists impact and corrosion
  • Dedicated ground pin ensures safe grounding on every connection
  • Certified to UL CSA IEC 60309 standards for code compliance

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
Color/FinishGray
Color MappingGray
TypeLight Switch

Questions about this item

What cable size and type must I already have to terminate this 100 A 600 V AC pin and sleeve connector?

The connector accepts four wires — three phase conductors plus a dedicated ground — sized for 100 A service at 600 V AC or 250 V DC.

Will this 3-pole 4-wire connector mate with my existing IEC 60309-2 100 A 600 V AC inlet?

Yes, it complies with IEC 60309-1 and 60309-2, so it will interface with any standard 100 A 600 V AC 3-pole 4-wire inlet of the same series.

How can I verify the NEMA 4X watertight seal is effective after I wire and install the connector?

Inspect that the Valox 357 housing and aluminum shroud are fully engaged, the locking ring is tight, and no moisture enters the mating face when the circuit is energised.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.