Hubbell Incorporated
Hubbell Incorporated HBL2340 Locking Receptacle L8-20R 20 A 480V video accessory
A 20 A, 480 V AC locking receptacle with straight orientation, flush mounting and screw-terminal wiring
- TypeLocking Devices
- ColorBlack
- 20 A locking receptacle rated for 480 V AC
- Straight NEMA L8-20R configuration for secure three-wire connection
- Nylon housing with brass contacts resists wear in industrial use
- Flush-mount single-gang design fits standard electrical boxes
- Screw-terminal wiring allows reliable field installation
Electrical fit and purpose
This Hubbell HBL2340 locking receptacle is rated for 20 A at 480 V AC and uses the NEMA L8-20R configuration. It suits single-phase circuits that need a secure, polarized connection in industrial or commercial wiring projects.
Behaviour under sustained load
The contact material is brass and the wire connection uses screw terminals, which maintain consistent conductivity when the circuit runs continuously at the rated current. The nylon housing and non-flanged, flush-mount design keep the device stable in a fixed enclosure without a cover.
Thermals noise and power
The receptacle itself draws no power and produces no noise; heat rise depends on the upstream wiring and load. With a NEMA 1 enclosure rating it is intended for indoor, dry locations where ambient temperature stays within normal building ranges.
Highlights
- 20 A locking receptacle rated for 480 V AC
- Straight NEMA L8-20R configuration for secure three-wire connection
- Nylon housing with brass contacts resists wear in industrial use
- Flush-mount single-gang design fits standard electrical boxes
- Screw-terminal wiring allows reliable field installation
Specifications
| Brand | Hubbell Wiring Device-Kellems |
|---|---|
| Model | HBL2340 |
| Type | Locking Devices |
| Color | Black |
Questions about this item
Does the 20 A 480 V receptacle generate noticeable heat or noise when it carries a continuous load all day?
The HBL2340 is a passive locking receptacle with no moving parts or active electronics, so it produces no audible noise and negligible heat under normal 20 A operation.
What wiring and mounting hardware must I already have to install this L8-20R receptacle?
You need three conductors sized for 20 A at 480 V AC, a standard single-gang flush-mount box, and a screwdriver for the screw-terminal connections.
Will this NEMA L8-20R receptacle mate with older L8-20P plugs that are still in service?
Yes, the L8-20R configuration is a fixed NEMA standard, so any compliant L8-20P plug — regardless of age — will lock securely into this receptacle.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



