Hubbell Incorporated
Hubbell Incorporated HBL14W48 3 Wire Industrial Watertight Straight Plug 20A 250V IP69K
A 20 A, 250 V straight-blade plug with IP69K watertight sealing for 0.300–0.625 in cords
- TypeBus Plugs
- Industrial-grade watertight seal with IP69K rating
- 20 A 250 V AC power delivery for heavy equipment
- Corrosion-resistant yellow thermoplastic elastomer Valox housing
- Accepts cord diameters from .300 to .625 in
- 0 HP motor-load rating for demanding applications
Industrial Watertight Straight Plug
The Hubbell HBL14W48 is a 20 A, 250 V straight-blade plug rated IP69K for industrial environments. It accepts 3-wire cord diameters from .300 in to .625 in and is built from yellow thermoplastic elastomer and Valox for corrosion resistance. The device carries a 2.0 HP rating and uses a 6-20P wiring configuration.
Suited for harsh wet locations
This plug fits equipment that must survive high-pressure wash-downs and corrosive atmospheres in food processing, marine or heavy-industrial settings. Installations requiring a different amperage, voltage, pole count or a non-watertight connector should select an alternative device.
Sustained-load behaviour
The IP69K enclosure and corrosion-resistant materials maintain seal integrity and electrical continuity during prolonged exposure to steam cleaning and chemical splash. Thermoplastic elastomer and Valox construction resists deformation and degradation under continuous 20 A loading at 250 V AC.
Highlights
- Industrial-grade watertight seal with IP69K rating
- 20 A 250 V AC power delivery for heavy equipment
- Corrosion-resistant yellow thermoplastic elastomer Valox housing
- Accepts cord diameters from .300 to .625 in
- 0 HP motor-load rating for demanding applications
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|---|
| Type | Bus Plugs |
Questions about this item
What cord diameter range does the HBL14W48 straight plug accept?
The plug accepts cord sizes from .300 in to .625 in, so the cable jacket must fall within that range for a proper seal.
Will this 20 A 250 V plug mate with my existing 6-20R receptacle?
Yes, the HBL14W48 is a 6-20P configuration with 2 poles and 3 wires, matching a standard 6-20R outlet.
How can I confirm the IP69K seal is intact after wiring the plug?
After assembly, inspect that the thermoplastic elastomer grommet compresses evenly on the cord and the yellow housing locks fully; a correct fit shows no gaps at the cable entry.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
