Advance Tabco
Advance Tabco FC-1-1818-X Wall Mounted Sink 18 in x 18 in, 304
- Silver
$790.99
0.00940043BTC
In stock
Hubbell Incorporated
Hubbell Incorporated HBL1281 20 A 120/277 V push-button dimmer switch
A push-button dimmer switch rated 20 A at 120/277 V AC for single-pole lighting circuits
- Color/FinishBrown
- Color MappingBrown
- TypeLight Switch
- 20 A rating handles heavy lighting loads
- 120/277 V AC compatibility suits commercial and residential circuits
- Push-button single-pole operation provides simple on/off control
- Side-wired screw terminals accept 14 to 10 AWG conductors
- UL listed for verified safety compliance
Single-pole push-button switch
The Hubbell HBL1281 is a single-pole push-button switch rated for 20 A at 120/277 V AC. It is intended for residential or commercial lighting circuits where a maintained on-off action is required. The brown finish suits standard decorator wall plates.
Wiring and circuit checks
Verify that the supply voltage matches the 120/277 V AC rating and that the circuit breaker does not exceed 20 A. Confirm the existing box accepts side-wired screw terminals and that conductors fall between 14 AWG and 10 AWG. The switch provides a 1 hp motor rating for fan loads.
Thermals and operation
The impact-resistant body and large brass binding-head screws with deep slots maintain secure connections under normal load. No active cooling is used; the device dissipates heat through its mounting strap. Operation is silent with a positive mechanical click.
Highlights
- 20 A rating handles heavy lighting loads
- 120/277 V AC compatibility suits commercial and residential circuits
- Push-button single-pole operation provides simple on/off control
- Side-wired screw terminals accept 14 to 10 AWG conductors
- UL listed for verified safety compliance
Specifications
| Brand | Hubbell Wiring Device-Kellems |
|---|---|
| Color/Finish | Brown |
| Color Mapping | Brown |
| Type | Light Switch |
Questions about this item
What comes in the box with the HBL1281 switch and what must be purchased separately?
The box contains the single-pole push-button switch with large brass binding-head screws and a strip gauge for accurate wiring. You must supply 14 to 10 AWG wire and a suitable wall box.
The HBL1281 is rated 20 A at 120/277 V AC with a 1 hp motor rating — which version should I choose?
This is the only version offered: a brown, single-pole, maintained-contact switch rated 20 A, 120/277 V AC, 1 hp, with side-wired screw terminals. Select it when those ratings match your circuit.
What does the 20 A 120/277 V rating mean once the switch is installed in a real circuit?
It means the switch can safely control a 120 V or 277 V AC lighting or motor load up to 20 A resistive or 1 hp inductive, using 14 to 10 AWG conductors on the side screw terminals.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
