We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Gray toggle switch, rectangular body, screw terminals visible

Hubbell Incorporated

Hubbell Incorporated HBL1224GY 4-Way Toggle Switch 20A 120/277V Gray

SKU CH-2J83-34GCT

A 20 A, 120/277 V AC toggle switch that controls one circuit from four locations using screw terminals for 14 to 10 AWG wire

  • Color/FinishGray
  • Color MappingGray
  • TypeLight Switch
  • 20 A rating supports heavy-duty lighting loads
  • 120/277 V AC dual voltage fits commercial circuits
  • 4-way toggle enables multi-location control
  • Back and side wiring with 14–10 AWG screw terminals
  • UL Listed, shatter and crack resistant construction

Hubbell HBL1224GY 4-Way Toggle Switch

This Hubbell HBL1224GY is a 4-way toggle switch rated for 20 A at 120/277 V AC. It is designed for multi-location lighting control in residential or commercial electrical installations. The gray finish and shatter-resistant construction suit standard wall-plate mounting. Electricians and maintenance staff will find it fits typical 120/277 V lighting circuits.

Installation uses back

The device accepts 14 AWG to 10 AWG conductors via back and side screw terminals. Strip insulation cleanly and tighten each terminal to the proper torque to avoid loose connections. A common error is misidentifying the 4-way switch traveller pairs, which reverses the switching sequence. Verify the circuit is de-energised before wiring and confirm traveller continuity with a tester.

20 A rating handles 1 hp motor loads

At 20 A the switch comfortably controls incandescent, LED and fluorescent lighting circuits as well as fractional horsepower motors up to 1 hp. The 120/277 V rating covers both common North American phase voltages. It is not suited for loads exceeding 20 A or for circuits requiring a different switching configuration such as 3-way or single-pole only.

Highlights

  • 20 A rating supports heavy-duty lighting loads
  • 120/277 V AC dual voltage fits commercial circuits
  • 4-way toggle enables multi-location control
  • Back and side wiring with 14–10 AWG screw terminals
  • UL Listed, shatter and crack resistant construction

Specifications

BrandHubbell Wiring Device-Kellems
Color/FinishGray
Color MappingGray
TypeLight Switch

Questions about this item

How can I verify the 4-way toggle switch is wired correctly after installation?

With power restored, operate the toggle from each of the three switch locations; the load should turn on and off from every position without sticking, confirming the 20 A 120/277 V circuit is functioning as intended.

What comes in the box and what must I supply for a standard 14 AWG to 10 AWG installation?

The package contains the single gray 4-way toggle switch with screw terminals; you must provide 14 AWG to 10 AWG copper wire, wire connectors, a compatible wall box and cover plate.

Which version should I choose for a 20 A lighting circuit that runs on both 120 V and 277 V?

Select the HBL1224GY model — it is rated 20 A at 120/277 V AC, uses a maintained toggle action, and fits standard back- and side-wiring with screw terminals.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.