We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory double-pole toggle switch with screw terminals

Hubbell Incorporated

Hubbell Incorporated HBL1202I double-pole toggle light switch 15 A 120/277 V ivory

SKU CH-XKNH-PZW4C

A double-pole toggle light switch rated 15 A at 120/277 V with back and side wiring for 14 to 10 AWG conductors

  • Color/FinishIvory
  • Color MappingIvory
  • TypeLight Switch
  • Double-pole control for two circuits
  • 15 A rating handles standard lighting loads
  • 120/277 V AC suits residential and commercial wiring
  • Shatter and crack resistant body withstands impact
  • Screw terminals accept 14 to 10 AWG wire

Double-pole toggle switch for 120/277 V circuits

The Hubbell HBL1202I is a double-pole toggle light switch rated at 15 A and 120/277 V AC. It is designed for commercial and residential wiring where two hot conductors must be switched simultaneously. The ivory finish matches standard wall plates in offices, schools and homes.

Thermals noise and power draw in normal use

The switch operates silently with no moving parts that generate audible noise. It dissipates minimal heat during normal operation at rated current. Power draw is limited to the connected load; the device itself consumes no standby power.

15 A double-pole rating decides suitability

This unit provides a single double-pole circuit rated for 15 A at 120/277 V AC. It accepts 14 to 10 AWG wire on back and side screw terminals. Buyers who need a single-pole switch, a higher amperage rating, or a different voltage range should select another device.

Highlights

  • Double-pole control for two circuits
  • 15 A rating handles standard lighting loads
  • 120/277 V AC suits residential and commercial wiring
  • Shatter and crack resistant body withstands impact
  • Screw terminals accept 14 to 10 AWG wire

Specifications

BrandHubbell Wiring Device-Kellems
Color/FinishIvory
Color MappingIvory
TypeLight Switch

Questions about this item

How do I wire the HBL1202I switch using the back and side screw terminals?

Strip wire to the gauge marked on the device, insert into back-wire holes or wrap clockwise around side screws, then tighten the large brass binding-head screws securely.

Will the ivory toggle or the shatter-resistant body need replacement over time?

The toggle and impact-resistant body are built for maintained contact duty; no user-serviceable parts inside, so replacement is only needed if the switch is physically damaged.

What is the maximum continuous load the 15 A double-pole switch can handle at 120/277 V?

The switch is rated for 15 A resistive at 120/277 V AC and 1/2 hp motor load; sustained operation at full rating is within its UL-listed limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.