We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular toggle switch with screw terminals and smooth matte finish

Hubbell Incorporated

Hubbell Incorporated HBL1201W toggle dimmer switch 15 A 120/277 V white

SKU CH-W8TD-3BNKR

A white single-pole toggle switch rated 15 A at 120/277 V AC with back and side screw terminals for 14 to 10 AWG wire

  • Color/FinishWhite
  • Color MappingWhite
  • TypeLight Switch
  • Single-pole toggle controls lighting from one location
  • 15 A rating handles standard residential and commercial loads
  • 120/277 V compatibility suits both 120 V and 277 V circuits
  • Back and side wiring with 14–10 AWG screw terminals speeds installation
  • UL listed, shatter-resistant and impact-resistant for durable performance

Hubbell HBL1201W Toggle Switch

The Hubbell HBL1201W is a single-pole toggle switch rated 15 A at 120/277 V AC for residential and light commercial lighting circuits. It fits a standard wall box and uses screw terminals that accept 14 to 10 AWG conductors. The white thermoplastic body is shatter and crack resistant and the device carries a UL listing.

Suitable For Standard Lighting Loads

This switch suits electricians and homeowners wiring or replacing a single lighting circuit where a maintained toggle action is required. It also supports motor loads up to 1/2 hp on the same rating. Buyers needing multi-location control, dimming capability or a different amperage or voltage rating should select a different device.

Check Box And Wiring Before Order

Verify that the existing wall box accommodates a single-pole mechanism and that the circuit voltage is 120/277 V AC with a 15 A breaker. Confirm the conductors are solid or stranded copper between 14 and 10 AWG for the screw terminals. Ensure the wiring method matches back or side entry as required by the installation.

Highlights

  • Single-pole toggle controls lighting from one location
  • 15 A rating handles standard residential and commercial loads
  • 120/277 V compatibility suits both 120 V and 277 V circuits
  • Back and side wiring with 14–10 AWG screw terminals speeds installation
  • UL listed, shatter-resistant and impact-resistant for durable performance

Specifications

BrandHubbell Wiring Device-Kellems
Color/FinishWhite
Color MappingWhite
TypeLight Switch

Questions about this item

What wiring must already be in the wall box for the HBL1201W to install correctly?

The switch fits a single-pole circuit with 120/277 V AC supply and accepts 14 AWG to 10 AWG copper wire on its screw terminals.

Will the HBL1201W control an older 1/2 hp motor load on the same circuit?

Yes, the switch carries a 1/2 hp rating at 120/277 V AC, so it can switch that motor load within its 15 A limit.

How can I confirm the HBL1201W is operating properly after wiring it?

Toggle the switch; the connected lamp or motor should turn on and off cleanly with no arcing, and the toggle should feel firm in both positions.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.