We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory toggle light switch single pole 15A 120/277V AC

Hubbell Incorporated

Hubbell Incorporated HBL1201I Ivory Toggle Light Switch

SKU CH-5FVP-XKTXE

Single-pole toggle switch rated 15 A at 120/277 V AC with back and side wiring for 14–10 AWG conductors

  • Color/FinishIvory
  • Color MappingIvory
  • TypeLight Switch
  • Ivory toggle blends with light décor
  • Single-pole switch controls one circuit from one location
  • 15 A rating handles standard lighting and 1/2 hp motor loads
  • 120/277 V AC compatibility suits residential and commercial wiring
  • Back and side screw terminals accept 14 to 10 AWG conductors

Ivory Toggle Switch for Residential Lighting

The Hubbell HBL1201I is a single-pole toggle switch rated 15 A at 120/277 V AC for standard lighting circuits. Its ivory finish matches common wall plates in homes and light-commercial spaces. The device accepts 14 to 10 AWG conductors via back and side wiring with screw terminals. UL listing confirms compliance with safety standards.

Replacing Worn Single-Pole Switches

This unit replaces an existing single-pole switch controlling one lighting load from a single location. The upgrade is worthwhile when the old switch shows cracking, loose toggles or unreliable contact. Shatter-resistant construction and impact-resistant materials extend service life in high-traffic areas. Large brass binding-head screws with deep slots simplify installation.

Sustained Load Behaviour

The switch carries its full 15 A rating continuously without derating for maintained switching duty. A 1/2 hp horsepower rating supports small motor loads such as bathroom fans. Brass terminals resist heat rise during extended operation. The strip gauge ensures consistent conductor preparation for reliable long-term connections.

Highlights

  • Ivory toggle blends with light décor
  • Single-pole switch controls one circuit from one location
  • 15 A rating handles standard lighting and 1/2 hp motor loads
  • 120/277 V AC compatibility suits residential and commercial wiring
  • Back and side screw terminals accept 14 to 10 AWG conductors

Specifications

BrandHubbell Wiring Device-Kellems
Color/FinishIvory
Color MappingIvory
TypeLight Switch

Questions about this item

What wall-box depth and wire gauge range does the HBL1201I toggle switch require?

The switch fits a standard single-gang box and accepts 14 AWG to 10 AWG conductors on its screw terminals.

Which wiring method should I use for the 15 A single-pole switch, and what common mistake should I avoid?

Use back-wiring or side-wiring with the large brass binding-head screws; the frequent error is skipping the strip-gauge and leaving too much bare copper exposed.

When will the toggle mechanism or contacts need replacement in a 120/277 V AC circuit?

The UL-listed switch is rated for 15 A and 1/2 hp loads; replace it if the toggle feels loose, shows discoloration, or no longer makes positive contact.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.