Hubbell Incorporated
Hubbell Incorporated HBL1201BK 15 A 120/277 V AC single-pole toggle switch
A 15 A single-pole toggle switch rated for 120/277 V AC with screw terminals for 14–10 AWG wire and a 1 hp motor rating
- 15 A 120/277 V AC rating handles standard lighting circuits
- Single-pole toggle gives simple on/off control
- Back and side wiring with screw terminals accepts 14 to 10 AWG conductors
- 1 hp motor rating suits small equipment loads
- Shatter-resistant and impact-resistant body withstands job-site abuse
Single-pole 15 A toggle switch
The Hubbell HBL1201BK is a single-pole toggle switch rated for 15 A at 120/277 V AC. It suits residential and light-commercial circuits that need a maintained on/off control. The shatter-resistant body and UL listing make it appropriate for standard wall-box installations.
1 hp motor load and 10 AWG maximum wire
The switch handles a 1 hp motor load, giving headroom for small fans, pumps or garage-door openers. Back and side wiring accept conductors from 14 AWG up to 10 AWG, so installers can use the same device on lighting and heavier branch circuits. Circuits exceeding 15 A or requiring multi-location control fall outside its rating.
Screw terminals and toggle actuator
Screw-terminal connections provide a secure mechanical bond for solid or stranded copper wire. The toggle actuator gives clear tactile feedback and a visible position indicator. No pilot light, dimming function or smart-home module is included, so the switch remains a basic manual control.
Highlights
- 15 A 120/277 V AC rating handles standard lighting circuits
- Single-pole toggle gives simple on/off control
- Back and side wiring with screw terminals accepts 14 to 10 AWG conductors
- 1 hp motor rating suits small equipment loads
- Shatter-resistant and impact-resistant body withstands job-site abuse
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|
Questions about this item
Will the 120/277 V AC rating work with my existing 120 V lighting circuit?
Yes, the switch is rated for 120/277 V AC, so it operates correctly on standard 120 V circuits as well as 277 V commercial circuits.
How can I verify the toggle switch is functioning properly after installation?
Flip the toggle to the on position; the connected load should receive power. Flip it off and power should be cut. The maintained action keeps the toggle in each position until moved again.
Does the box include mounting screws or wire connectors, or must I buy them separately?
The switch includes screw terminals that accept 14 to 10 AWG wire. Mounting screws and wire connectors are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
