We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ivory nylon GFCI receptacle with test and reset buttons

Hubbell Incorporated

Hubbell Incorporated GFRTR20I GFCI Receptacle 20A 125V Ivory Nylon

SKU CH-ZYF8-J3PE1

A 20 A, 125 V GFCI receptacle with continuous self-test monitoring and tamper-resistant shutters

  • TypeWiring Devices
  • Automatic self-test every 30 seconds ensures continuous protection
  • Patented AUTOGUARD technology disconnects power if protection is lost
  • Tamper-resistant shutter design blocks foreign object insertion
  • Clear visual indicators show power, trip, fault and end-of-life status
  • Meets NEC 406.12 and NEC 517-18(c) code requirements

20 A GFCI receptacle for indoor wiring

The Hubbell GFRTR20I is a 20-ampere, 125-volt ground-fault circuit interrupter built for residential and light-commercial branch circuits. Its ivory nylon face fits standard decorator wall plates and meets NEC 406.12 tamper-resistant requirements for dwelling units and NEC 517-18(c) for healthcare areas.

AUTOGUARD self-test and triple-wipe contacts

Patented AUTOGUARD technology runs an internal diagnostic every 30 seconds and cuts power to the face if protection is lost or critical components fail. Clear status LEDs show power, trip, ground-fault and end-of-life conditions, while triple-wipe line and load contacts improve connection reliability over the device life.

Verify circuit amperage

Confirm the branch circuit is protected by a 20 A breaker and uses conductors rated for 20 A service. Ensure the existing wall box provides sufficient cubic-inch capacity for the device and any splices, and that line and load conductors are identified correctly to avoid reverse-wiring lockout.

Highlights

  • Automatic self-test every 30 seconds ensures continuous protection
  • Patented AUTOGUARD technology disconnects power if protection is lost
  • Tamper-resistant shutter design blocks foreign object insertion
  • Clear visual indicators show power, trip, fault and end-of-life status
  • Meets NEC 406.12 and NEC 517-18(c) code requirements

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeWiring Devices

Questions about this item

Does the AUTOGUARD self-test function require any scheduled replacement or recalibration?

The self-test runs automatically every 30 seconds and the end-of-life indicator on the face shows when the device must be replaced; no separate recalibration is needed.

What is the first limitation reached during continuous operation at the full 20 A rating?

The 125 VAC rating and 20 A capacity define the thermal and electrical limit; sustained loads above 20 A will trip the internal protection.

How much heat or audible noise does the receptacle produce when powered all day?

The AUTOGUARD self-test operates silently and the triple-wipe contacts add negligible heat; normal warmth at 20 A is the only noticeable effect.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.