We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Brown nylon GFCI receptacle with test and reset buttons

Hubbell Incorporated

Hubbell Incorporated GFRTR20 GFCI Receptacle 20A 125V Brown Nylon

SKU CH-J8T0-B8EGK

A 20-amp 125-volt GFCI receptacle with continuous self-test monitoring every 30 seconds and visual status indicators

  • TypeWiring Devices
  • Continuous self-testing every 30 seconds ensures reliable protection
  • Patented AutoGuard technology disconnects power if GFCI function is lost
  • Visual indicators show power status, trip, ground fault and end of life
  • Meets 2015 UL 943 standard for GFCI safety compliance
  • 20 A 125 V rating suits standard residential and commercial circuits

Electrical safety for wet locations

This 20 A, 125 V GFCI receptacle provides ground-fault protection for residential and light-commercial circuits. It is suited for kitchens, bathrooms, garages and outdoor outlets where shock risk is higher. The brown nylon face fits standard wall plates and matches common décor.

Continuous self-test monitoring

Hubbell AUTOGUARD® technology runs an automatic test cycle every 30 seconds to verify protection integrity. If critical components fail or line and load wires are reversed, power to the receptacle face is cut off. Visual indicators on the device show power status, trip condition, ground fault and end-of-life state.

No extra accessories included

The unit ships as a single receptacle without mounting screws, wall plate or wiring connectors. Electricians supply their own hardware and follow local code for installation. The self-test function requires no configuration software or firmware updates.

Highlights

  • Continuous self-testing every 30 seconds ensures reliable protection
  • Patented AutoGuard technology disconnects power if GFCI function is lost
  • Visual indicators show power status, trip, ground fault and end of life
  • Meets 2015 UL 943 standard for GFCI safety compliance
  • 20 A 125 V rating suits standard residential and commercial circuits

Specifications

BrandHUBBELL WIRING DEVICE-KELLEMS
TypeWiring Devices

Questions about this item

How do I wire the Hubbell GFRTR20 GFCI receptacle, and what common mistake should I avoid?

Connect line conductors to the LINE terminals and load conductors to the LOAD terminals; the device will deny power if line and load are reversed, so verify terminal markings before tightening screws.

What maintenance or replacement will the GFRTR20 need over time?

The AUTOGUARD self-test runs every 30 seconds; when the end-of-life indicator lights, the receptacle has lost protection capability and must be replaced.

What limit appears first during sustained use of this 20 A 125 V receptacle?

The 20 A continuous current rating is the primary limit; exceeding it will cause the GFCI to trip or the circuit breaker to open.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.