Hubbell Incorporated
Hubbell Incorporated DT5030LA Electronic Timer 120/277V Light Almond
Electronic countdown timer with 5-to-30-minute range, 120/277 V AC operation and manual override in a light almond wall-switch housing
- Electronic timer covers 120/277 V AC for flexible installations
- Countdown range from 5 to 30 minutes suits varied load schedules
- 1000 W at 120 V and 1400 W at 277 V handles lighting and motor loads
- Manual override plus five preset buttons give instant control without reprogramming
- Meets CEC Title 24, ASHRAE 90.1 and cULus 60730 standards for code compliance
Electronic Countdown Timer — Light Almond
The Hubbell DT5030LA is a wall-switch electronic timer rated for 120/277 V AC circuits. It provides a 5 to 30 minute countdown range with five pre-set buttons and permanent markings, suited for lighting or motor loads in commercial and residential installations.
Thermals Noise Power
The device draws up to 8.30 A and switches 1000 W at 120 V or 1400 W at 277 V with a 1/6 hp motor rating. As a solid-state electronic switch it operates silently and generates minimal heat during normal timed cycles.
Upgrade From Mechanical Timers
This unit replaces mechanical spring-wound timers where quiet operation, pre-set selections and manual override are required. The jump is worth it when Title 24, ASHRAE 90.1 or UL 60730 compliance is specified for the project.
Highlights
- Electronic timer covers 120/277 V AC for flexible installations
- Countdown range from 5 to 30 minutes suits varied load schedules
- 1000 W at 120 V and 1400 W at 277 V handles lighting and motor loads
- Manual override plus five preset buttons give instant control without reprogramming
- Meets CEC Title 24, ASHRAE 90.1 and cULus 60730 standards for code compliance
Specifications
| Brand | HUBBELL WIRING DEVICE-KELLEMS |
|---|
Questions about this item
How is the DT5030LA installed in a standard wall box and what wiring step is often missed?
Wire the timer in series with the load using the 120/277 V AC supply; the step often missed is connecting the neutral conductor required for the electronic circuitry.
What maintenance or replacement will the DT5030LA need after extended use?
The electronic timer has no user-serviceable parts; replace the entire unit if the relay contacts wear out or the countdown function fails.
What is the first limit reached on the DT5030LA during sustained operation at full load?
The 8.30 A / 1000 W (120 V) or 1400 W (277 V) rating is the limiting factor; exceeding it will cause the internal protection to trip.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
